Hood/Hinge Problem

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
PS13drift
Posts: 44
Joined: Wed Dec 11, 2002 5:50 pm
Car: 93 S13 Coupe

Post

i recently got the silvia front end for my s13. once i installed the hood i noticed it wasnt latching into the hood latch. i positioned the hood in the correct spot. so why would this be, any ideas?


User avatar
quiksilvia
Posts: 3197
Joined: Mon Jan 06, 2003 7:09 am
Car: 95 s14 se
Contact:

Post

did u adjust the hinges front to back and the latch up and down?

Nismo_Freak
Posts: 10314
Joined: Wed Jul 24, 2002 10:42 pm
Car: 89 Nissan 240SX

Post

Yeah the hood latch mechanism adjusts, it might be too low for the hood to close.

User avatar
offtheline
Posts: 527
Joined: Fri Mar 21, 2003 12:59 am

Post

Yeah, I had that problem on an old accord. Went to the junkyard to get a new latch assembly. Turns out all I needed was to adjust the height. Might want to try that.

User avatar
PS13drift
Posts: 44
Joined: Wed Dec 11, 2002 5:50 pm
Car: 93 S13 Coupe

Post

: quiksilvia wrote:did u adjust the hinges front to back and the latch up and down?
the hood is in the correct position, the front hook sits right in the latch. edit: it just doesn't click in all the way.
: festino wrote:Yeah, I had that problem on an old accord. Went to the junkyard to get a new latch assembly. Turns out all I needed was to adjust the height. Might want to try that.
where do i adjust the latch at?

User avatar
quiksilvia
Posts: 3197
Joined: Mon Jan 06, 2003 7:09 am
Car: 95 s14 se
Contact:

Post

loosen the screws and it will slide up and down

topless@vabeach
Posts: 131
Joined: Thu Sep 19, 2002 11:56 am
Car: Electronics, anything that has trons in it.

Post

Should be three bolts right on the latch assembly, not the part on your hood. You might want to mark the assebly where its at right now with a marker or chaulk before you loosen the bolts. This way you can tell if you moved it up or not.

User avatar
PS13drift
Posts: 44
Joined: Wed Dec 11, 2002 5:50 pm
Car: 93 S13 Coupe

Post

yeah, it was three bolts.the hood fits great now. thanks for the info.

User avatar
quiksilvia
Posts: 3197
Joined: Mon Jan 06, 2003 7:09 am
Car: 95 s14 se
Contact:

Post

de nada


Return to “240SX Technical Forum”