HKS dump pipe clears the steering on the Rb20!

[RB20DETodd]

I recently picked up a HKS Gt2540 and a HKS dump pipe, i was worried there was no way in hell the dump would clear my steering, so tonite i pulled the stock dump to test fit the HKS one and it fits i had to dent it a little but not much easy to do since its stainless steel, nice power gain in the top end cause its not dumping into a ****ing wall like the stock and the quality is well awesome, thought id let you guys know if your looking for a dump cause the ebay ones DONT fit, im useing the rb20det with the r32 x member.

[Bronze MFP]

is this on an s13 or s14?

[SeVa-S13]

S13

[Bronze MFP]

ok, well s14 buyers should beware that it may not clear. I went through a few dump pipes that cleared on s13's but didn't on my s14

[rotorimp]

My E-bay dump fits--what one do you have that does not?

[FriedEGs]

My E-bay dump fits--what one do you have that does not?

what elbow do you have?what motor?what chassis?

[RB20DETodd]

what elbow do you have?what motor?what chassis?

I imagine thats it unless its custom and there is no way that one will work unless you have the mount kit of all mount kits or you cut the small tube off and make a screamer pipe still then i had to dent it alot to clear the steering.

[RB20DETodd]

http://cgi.ebay.com/ebaymotors...wItem

one one ebay right now

[audtatious]

Your sig is too big. Edit it please.

Nevermind, you were already asked.

[RB20DETodd]

Your sig is too big. Edit it please.

Nevermind, you were already asked.

Sorry i check that email like once a month, i sighned up for nico way back in the day under my [email protected] email, was never able to get my password of that name.

[rotorimp]

I rewelded my crossmember to be as low and far back as possible-(including 1/2 to 3/8 indention for the starter) thats probably why I got it to fit