Hit the dyno and track in same day, very impressed!!

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
turboex
Posts: 274
Joined: Mon Sep 23, 2002 3:58 pm
Contact:

Post

Well hit the dyno first, with a redtop sr20det, hks-s fmic, and fuel pump. I made 187hp and 192 tq at 7psi of boost. ( I may have made more but there was no fan or anything on the intercooler, oh well). Then I headed to the track and ran a 8.5 at 99mph in the quarter at the stock boost seting of 7psi. Im very pleased with the car. Figuring they make 210hp stock 180 is a good number for at the wheels, and the quarter time makes honda owners with the same hp cry.


Machine
Posts: 110
Joined: Fri Jul 26, 2002 7:13 am

Post

you didnt run an 8.5 in the 1/4 mile, maybe the 1/8

rom
Posts: 12
Joined: Sun Dec 22, 2002 7:44 pm

Post

8.5 in 1/4?U mean in a 1/8mile?

turboex
Posts: 274
Joined: Mon Sep 23, 2002 3:58 pm
Contact:

Post

yep that was 8th time my bad, i ran a 13.5 in quater

BuudWeizErr
Posts: 4745
Joined: Tue Sep 24, 2002 11:35 am

Post

13.5 @ 99 on 7 psi?

You must have one hell of a 60' and let off the gas at the 1000'

I want to see this timeslip.

turboex
Posts: 274
Joined: Mon Sep 23, 2002 3:58 pm
Contact:

Post

BuudWeizErr wrote:13.5 @ 99 on 7 psi?

You must have one hell of a 60' and let off the gas at the 1000'

I want to see this timeslip.


rt 0.62360ft 1.841330ft 5.544mid mph 79.09660foot 8.628990ft 11.228mph 99.1231320ft 13.554

I Done at Interstate dDragways, sabin North Dakota. 6:06pmIll get the slip scand or ill just post the video, have to get camra from friend. As for letting go of gas, that may be true. My boy in the LS/VTEC NOS integra ran a 13.6@101mph. See the speed board is a good bit before the sensors and I think i did let go of the gas about 40-50ft before them.Also i made this run on drag radials, but even on my 17's i get a 2.0 or less 60ft, whats the deal with your 2.4? My civic used to pull 2.3-2.1's on street tires with a open diff. Oh also I have a s14 VLSD. What do you launch at? I launch at 6200rpm on drag radials and 4800 on street tires to get these times. Ill scan the dyno sheet and time slip for ya tomorrow.

BuudWeizErr
Posts: 4745
Joined: Tue Sep 24, 2002 11:35 am

Post

Yeah... I can see it now. You definitely let off the gas.

As for my times... I'm not a drag racer. Only thing in drag racing I am good at is reactions. Consistent +- .550. I won money the first (and only) bracket competition I went to because of my R/T's.

I have crappy 205mm tires on an open diff and an on-off clutch. Launch at 2000, bog, 2500, smoke. So it's hard to find the happy medium, but again, I don't really care about drag racing, so I don't worry about it. I have gotten 2.25's, but on that run I cut a 2.389, so I just rounded up.


Return to “SR20DET Forum (rear-drive)”