High Velocity Intake Manifold

Post by **shift_craNk** » Thu Apr 26, 2012 8:35 am

http://speedforceracing.com/index.php?productID=1051

does anyone know if this is for a 2.5 or 3.5? it does specify, but the dyno pic looks like a 2.5, but i dont know for sure. i emailed them but havent gotten a response.

Post by **wade001** » Thu Apr 26, 2012 9:01 am

It's for the 6cyl

Post by **shift_craNk** » Thu Apr 26, 2012 9:05 am

wade001 wrote:It's for the 6cyl

best news ever!

Post by **DJ_B_Easy** » Thu Apr 26, 2012 10:06 am

Are you boosting? If not Id spend the $1100 elsewhere. Even if you are, not sure this is worthy.

Post by **shift_craNk** » Mon Apr 30, 2012 8:25 am

just cant find much performance mods for this car without spending that 6K on the boost. i already have the intake ypipe and full exhaust. i want the lightweight pulley and the intake manifold got my interest. and of course a tune by wither bullydog or uprev.

Post by **DJ_B_Easy** » Mon Apr 30, 2012 10:24 am

Read the fine print and Dyno sheet. You arent gaining 30HP with this. According to their Dyno sheet, the maximum gain is 5HP. The 30HP advertised is the difference between stock HP at redline and HV Intake HP at redline. At redline, the HP output is LESS than the maximum on the Dyno sheet. So you essentially are looking at this (RPM numbers are made up):

6,000 RPMs: Stock 255 HP vs High Velocity Intake 260 HP
7,500 RPMs: Stock 225 HP vs High Velocity Intake 255 HP

Post by **wade001** » Mon Apr 30, 2012 10:31 am

I remember a huge discussion some time ago about this when speed force came out with it. And that it really doesnt give you that 30hp or so. I doubt their dyno is with a stock 3.5

Post by **mmx23z** » Mon Apr 30, 2012 4:14 pm

wade001 wrote:I remember a huge discussion some time ago about this when speed force came out with it. And that it really doesnt give you that 30hp or so. I doubt their dyno is with a stock 3.5

the good ol days lol

sfr-intake-manifold-t502821.html?hilit= ... 20manifold

Post by **wade001** » Mon Apr 30, 2012 4:39 pm

mmx23z wrote:
wade001 wrote:I remember a huge discussion some time ago about this when speed force came out with it. And that it really doesnt give you that 30hp or so. I doubt their dyno is with a stock 3.5

the good ol days lol

sfr-intake-manifold-t502821.html?hilit= ... 20manifold

LMAO!! Bless you for being a long term member like me and thank you for the effort, made my day a bit better

! In general, I wouldn't by speedforce, their rep is not the best for our car at the very least

!

Post by **el_blacky06** » Mon Apr 30, 2012 6:34 pm

Daym just by reading the first page refreshed my memory about the sfr thread. It made me lol but decided not to post on it :P

Post by **DJ_B_Easy** » Mon Apr 30, 2012 7:09 pm

mmx23z wrote:the good ol days lol

sfr-intake-manifold-t502821.html?hilit= ... 20manifold

I actually posted in that thread a few times and didnt even remember it being about the intake manifold because it was so epic otherwise. I just re-read all 7 pages. Sucks, we didnt even get a warning before it was locked!

Post by **shift_craNk** » Tue May 01, 2012 8:38 am

thanks for the info guys. any performance suggestions then?

High Velocity Intake Manifold

High Velocity Intake Manifold

Re: High Velocity Intake Manifold

Re: High Velocity Intake Manifold

Re: High Velocity Intake Manifold

Re: High Velocity Intake Manifold

Re: High Velocity Intake Manifold

Re: High Velocity Intake Manifold

Re: High Velocity Intake Manifold

Re: High Velocity Intake Manifold

Re: High Velocity Intake Manifold

Re: High Velocity Intake Manifold

Re: High Velocity Intake Manifold

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums