high beam doesnt work

[maximaman256]

I changed my HID aasembly out for cosmetic reasons only, now that ive installed a new one my high beam isnt working on that side.. rather frustrating if i had to say.. any knowledge to why would be greatly appreciated..

[Hdnseek]

if i can recall on my i35 the high beam was a seperate bulb from my hid low beams. I swapped out my hid headlights for halogen because one of my ballasts was burnt out and i did a maxima front end swap. Did you check the bulb? Could of blown when you swapped out the ballast if you didnt disconnect the battery

[maximaman256]

Its actually one bulb on the maxima with a shutter like deal that moves up & down when you flick the switch to high that lets more light through.. The high beam was working before i swapped assemblies, I actually bought a halogen by accident not knowing they even made halogen for an 05 maxima. So we modified the halogen to be a HID which wasnt easy might I add but we did it, After we installed it and put it all back together is when we noticed the high beam not working.. So i bought a ebay HID plug & go and still no high beam.. all the fuses & relays are good to my knowledge, another guy mentioned to me that it could have triggered a fail safe of some kind in the ballast or BCM.. I have used 2 different ballast so im not sure thats it.. Also im not sure what BCM is at this time but i will find out with some research after i finish this "Andre The Giant" post.. Im trying to avoid going to the stealership and getting robbed of my hard earned cash nor do i wanna keep buying HID assemblies until i figure it out...
ANY KNOWLEDGE FROM ANYONE WOULD BE GREATLY APPRECIATED!!!!!!