hey i bought a 240sx umm but it has alittle rott look and help

Got questions about your Nissan? We're here to help, and it's FREE!
zigmon55
Posts: 3
Joined: Sun Jan 02, 2005 6:53 pm
Car: 1990 240sx
Contact:

Post

hey i just bought a 240 sx for 300$ it has rims good running engine and a system and all that good stuff but i looked it over and the only rust it has is on the frame by the left wheel look at it and tell me what u think?


zigmon55
Posts: 3
Joined: Sun Jan 02, 2005 6:53 pm
Car: 1990 240sx
Contact:

Post

i was thinking if i cut out the rust and stop it and then take like a 1/2 inch plate and weld it from inside and outside so it will have more support a good idea or junk the car?

s13sr20chris
Posts: 4148
Joined: Tue Jun 10, 2003 9:32 am
Car: '89 Nissan S13 w/redtop running 13psi and not leaking fuel anymore
Contact:

Post

sounds like a good idea. rust is fairly difficult to remove but you will be glad you did it.

navysnail
Posts: 3335
Joined: Wed Feb 11, 2004 1:33 pm
Car: 1990 Nissan 240SX fastback

Post

make sure you check all over the car, if there is that much rust in one place, there will probobly be a considerable ammount in other spots

s13sr20chris
Posts: 4148
Joined: Tue Jun 10, 2003 9:32 am
Car: '89 Nissan S13 w/redtop running 13psi and not leaking fuel anymore
Contact:

Post

yeah, and you can weld all day on two pounds of flux core wire. that flux core stuff works wonders on rusty metal. i would just clean it up as good as you can and go to town with the welder. also you can weld up your body seams and pinch welds. i would reccomend lots of stiffening in the front strut tower to a pillar area as that is the single weakest area on a s13.

zigmon55
Posts: 3
Joined: Sun Jan 02, 2005 6:53 pm
Car: 1990 240sx
Contact:

Post

hey so i was going to look over the 240 and when i went to jack up the car by the frame, the whole frame broke into 2 pieaces(il get pics on when i come home) so i sold it for 300 and thats all


Return to “Nissan Online Mechanic”