help with rb20det swap intoa bmw e36

[cvcalitos1]

im new here carlos from houston rb20 on the way to houston and his new hause a 95 bmw e 36 plan on upgrading fuel pump and injectors fuel management and get it tune to push the turbo to its limits see how many hp we can get out ..[IMG][/IM]if any one was any input on this swap please advise me i will thank you for it...

this are some pics of the procject so far we are stuck for the oil pan we need to modefiend it to fit the bmw e 36

Modified by cvcalitos1 at 8:14 PM 9/2/2009 http://s557.photobucket.com/albums/ss19/cvcalitos1/
Modified by cvcalitos1 at 11:34 PM 9/20/2009

[Bwana]

You'll receive more helpful info and less flaming in the RB forum. I'll move it for you!

Welcome to NICO!

[cvcalitos1]

thank very much

[Carl H]

curious as to why you'd be swapping an rb20 into an e36 if it already has a straight 6 in it...not many people have done bmw swaps but if you're handy with a service manual and can read wiring schematics you'll be golden.

[cvcalitos1]

im going to try it .this beamer has a 1.8 L non turbo around here everyone goes crazzy whene they hear a turbo blow off..i think this will be fun to do and i can only dream of what peaple are going to say whene they see a rb20det in a bmw..

[Vkoslak]

And here I was thinking a bmw m3 engine in a 240sx would be a lot of fun with less heat in the engine bay.

[cvcalitos1]

Yes but just think about it the posibility of the RB20det and the expacion of this engine compare to the inline 6 of the bmw it does not cut it for me and also the money to spend if whant to make more power vs the rb20det couple of modification and make alot of power.