Help with pricing brake parts?

[OHSHFT]

Hello, I am curious as to what price range i should be looking at to sell some items I have.

Z32 front and rear calipers and rotors
Z32 front and rear hubs with knuckes still attached
Z32 rear parking brake assemblies with cables

This would be a 5 lug and brake conversion for a 240 wouldnt it? Am I missing anything?

Thank you for any information.

[DCaff300ZX]

Well...your lucky day I decided just to see what this was about!

Z32 calipers and rotors in good shape should be an easy $100, maybe a tad more if in top shape and rotor thickness. I sold a set to a 240 guy in two days for $100.

Z32 hubs/knuckles a little fuzzy on, but should be OK at about $75 all four ...I'd check a pick and pull for their price and work from there. Be aware that Z32 has no steering angle and other knuckles are used by drifters/240 guys.

Z32 parking brake may be a tough sell except for a drifter needing a replacement, maybe $25 but probably best as a cheap throw-in for someone who would buy it all...so have a full kit price as well to work with...maybe $200/OBO and see where that goes?
Good Luck!

[centralcoaster33]

Only thing missing from a complete swap would be the front brake lines. There's no bango bolt on the front calipers like there is on the 240sx I believe.