help with flywheel

[Watermelonwarrior]

im putting my clutch and flywheel and the bolts that hold the flywheel in place what do i need to torque them to. thanks

[mtcookson]

For some reason I couldn't find it anywhere in the FSM but I did find it should be ~65 ft. lb. Be sure to use some Loctite and torque them in a cross pattern.

[Watermelonwarrior]

thanks a lot.you wouldnt by any chance know the torque on the bolts that go from clutch to flywheel?

[Watermelonwarrior]

by the way its a centerforce dual friction. i hope its an ok clutch i just need something to last me through summer then ill ether buy a twin turbo or do the swap.

[mtcookson]

Clutch to flywheel is 25-33 ft. lb. You don't need any Loctite for those but you definitely want to torque in a cross pattern like the flywheel.