HELP...tried nav hack

[flipside07]

i took the center console out with the nav, the stereo and all the wire out to look at it and see how the nav bypass would work i didnt cut any wires or anything when i connected it back up the service engine sign,tire pressure sign, and the passenger air bag sign came up. the tire pressure and airbag signs are blinking if that means anything. i dont understand how that happened does any know what i did wrong?

[joe603]

Welcome to NICO!

This is why I recommend you do the NAV bypass module...Not sure what you did wrong. I'd try and reset the ECU to see if it will clear the faults.

Check out the G-FAQ for a how-to on the NAV bypass (link in my sig)

[timmy0257]

when you took the AV unit out, did you notice any unused harness behind the unit? if so, make sure you connected all the right one back up.

is your AC blowing as it normally should?

[joe603]

That's a great idea! I'd take it all out again and reconnect everything. Make sure to unhook the battery before you start.

[flipside07]

I made sure I connected everything. And did the reset as well. Ill try to open it up again n connect it. I did test the wire around the vss to see if there negative or positive. I don't if that matters or not. But it's odd how the air bag sign flashes and the tire n ses sigN r on...

[timmy0257]

That's a great idea! I'd take it all out again and reconnect everything. Make sure to unhook the battery before you start.

thats what my problem was a few weeks ago!

[joe603]

So did you get it fixed?