Help tps

[Sideways s12]

Hey guys. I need to know how you can tell if your tps is bad? My acts the same whether plugged or unplugged. Any help would be greatly appreciated.....

[boost_boy]

A bad TPS displays poor throttle responses, sluggish take-offs backed-up by a burst of acceleration. The best thing to do is measure the resistance of your TPS using the method provided in the FSM. IMHO, I seriously doubt it's your TPS. The stock engine management system is notorious for going going into limp mode and staying there which causes your car to run like @ss no matter what you do.

[Sideways s12]

Well my acts as you have stated but it does with the tps plugged in and unplugged....where can I source another tps will the pulsars have them or can I jack one from a single cam ca?

[Noxy]

I have a spare. Pm'ed you

[Sideways s12]

pm replied.

Also was driving it yesterday and felt fine but now it only shows the symtoms that boost boy talked about when the motor is below operating temp. Any thoughts?

[float_6969]

New coolant temp sensor. 1989 Pulsar SE

[Sideways s12]

Thanks!

[Spawn_CA18]

you can check you tps via avometer on resistance position. measure it . i'dont know the exact values . but in voltage %100 throttle you have to see a value between 4.70 - 5 V

[Sideways s12]

Thank you sir. I will try that.