HELP!!!
-
liftedlamping
- Posts: 3
- Joined: Thu Nov 14, 2013 3:15 pm
- Car: 2003 Nissan exterra
HELP!!!
Hey all, I have a 2003 nissan xterra, 2wd 4cyl 5 speed. The rear ens went to crap and i need some help.My axle code is CA48 but everything I research shows nothing with that axle code. Help me please. Im looking to get a used axle assembly to just swap it out and be back on pavement.
-
Rev_D21
- Posts: 5946
- Joined: Sun Jan 12, 2003 9:49 pm
- Car: 1986.5 D21 LB HD 2WD V6 5Speed
1991 D21 Reg 2WD Auto
1995 D21 Reg 2WD 5Spd
1996 D21 Reg 4WD 5Spd
2012 Versa 1.6S 5-Speed - Location: Somwhere in Western NY
- Contact:
Re: HELP!!!
Is that the axle code off the door sticker?
-
liftedlamping
- Posts: 3
- Joined: Thu Nov 14, 2013 3:15 pm
- Car: 2003 Nissan exterra
Re: HELP!!!
yes off the door sticker
-
Rev_D21
- Posts: 5946
- Joined: Sun Jan 12, 2003 9:49 pm
- Car: 1986.5 D21 LB HD 2WD V6 5Speed
1991 D21 Reg 2WD Auto
1995 D21 Reg 2WD 5Spd
1996 D21 Reg 4WD 5Spd
2012 Versa 1.6S 5-Speed - Location: Somwhere in Western NY
- Contact:
Re: HELP!!!
What makes that odd might be the fact that it's a 2wd, 4cyl and a 5speed, most were v6, auto and 4wd. You are going to have an interesting time finding one. Have you tried http://www.car-part.com ?
-
liftedlamping
- Posts: 3
- Joined: Thu Nov 14, 2013 3:15 pm
- Car: 2003 Nissan exterra
Re: HELP!!!
ya it is a rare find. ill check out that site
-
freeman338
- Posts: 3
- Joined: Wed Nov 27, 2013 11:19 pm
- Location: NC
Re: HELP!!!
If you can't find the exact one one from a 3.3 4wd would fit as well I would think I do t know if the gearing would affect anything or not being that it's 2wd and I think if I'm not mistaken and axle from a hardbody or frontier 2.4 2wd I believe will work too bit again gearing but I'm pretty sure the xterra and frontier are the same chassis and everything just different bodies...can anyone else confirm this or correct me if I am wrong