Help!!

Information on the naturally-aspirated KA24E and KA24DE engines.
User avatar
wrestlrjared
Posts: 22
Joined: Thu Mar 05, 2009 7:46 pm
Car: 92 S13
Contact:

Post

Does my twin cam have a Baro sensor because I went to see my parents and the elevation there is about 4000 and my car would actually flood out and the only way to start it was to unplug all of the injectors and start it like that then plug the injectors back in. If anyone has any ideas let me know thanks


liquid_cool
Posts: 1700
Joined: Sat Jul 05, 2008 3:02 am
Car: 1990 Nissan 240SX KA24DE-T swap 8.6:1cr, duelsprings, ti retainers,supertech pistons, K1 H-beems balanced internals ect ect

Post

i know where your going with this post..most electronicly controlled vehicles that are fuel injected use a sort of barametric sensor of some type..im no expert..but i dont think your having a sensor issue persay..it might be more of a fuel injector issue..as the car running rich now?..after you got back ?..have you cleaned the air filter?...normally problems like this only happen in carburated vehicles and motorcycles.

User avatar
wrestlrjared
Posts: 22
Joined: Thu Mar 05, 2009 7:46 pm
Car: 92 S13
Contact:

Post

Yeah I just did a full tune up on it before I left new filters oil ect. and im back now and the cars runs great. but I was looking at the O2 before the cat and some one did splice into it at one point maybe trying to run a wide band O2 for it or for a gauge maybe that might have something to do with it


Return to “KA24E / KA24DE Forum”