help!

Discuss the RB20, RB25 and RB26 series engines.
rb20det_pwr
Posts: 226
Joined: Tue Oct 11, 2005 1:29 am
Car: skyline hcr32

Post

well, i got my gtr fuel pump today and put it in. (im in japan and i drive a 32 skyline gtst) trouble is when i put everything back in as i was putting the last two lines on, i ruptured the one that supplies gas to the engine. so, my question is how hard is it to replace the fuel line? i looked under the car but nothing jumped out at me. is it one line from the pump all the way to the engine? or is there a junction where i could easily replace it and be on my way?


User avatar
Wulfgang
Posts: 908
Joined: Tue Oct 28, 2003 5:41 pm

Post

You broke the hard line? Better get some hard line and a tubing bender and get under your car.

rb20det_pwr
Posts: 226
Joined: Tue Oct 11, 2005 1:29 am
Car: skyline hcr32

Post

hardline? its made of rubber though....?

T4 RB25det
Posts: 151
Joined: Fri Jul 22, 2005 11:47 am
Car: 1995 240

Post

is ti the supply line or the return line? before or after the filter if its the supply?if its pretty close to the motor, there is about 2 feet back from the fuel rail that is a seperate piece of fuel hose and takes 30 seconds to replace. that goes for return and supply

rb20det_pwr
Posts: 226
Joined: Tue Oct 11, 2005 1:29 am
Car: skyline hcr32

Post

its the supply, its not near the motor, its in the trunk. im going to try and investigate it today . thx though, ill be back with more info later.

User avatar
Wulfgang
Posts: 908
Joined: Tue Oct 28, 2003 5:41 pm

Post

Ah... the rubber lines are easy to replace. Just take the hose to the auto parts store and get some new hose.

The hardlines are made of steel and run underneath your car. They can also be replaced, but not as easily.


Return to “RB20DET / RB25DET / RB26DETT Forum”