help put me in the 400+ whp club!!!

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
kentuckyslider
Posts: 574
Joined: Tue May 20, 2008 7:51 pm
Car: 02 IS300 manual/03 G35 sedan auto

Post

I just joined nico today looking for some insight into getting more "useable power" out of my SR without running on the edge. I have had my S13 for about 9 months with this setup and want more. First off, I'm running a stock head and cams, stock intake, and throttle body. I have purchased a top speed intake and am debating on the 70mm tomie throttle body and adapter plate. Is it worth it??? Next, what cams would you recommend? I am also considering going to a gt3076 .63ar or a gt3071 with .86 ar with an internal gate. What cams, springs, and retainers would you get that will be flexible if I decided to upgrade to the bigger turbo? My 72lbs injectors aren't efficient past 450whp so just under that is my goal! I am setting this car up for drag racing and am considering a Labonte sport methanol kit WITH THE SAFTEY SETUP.


User avatar
kentuckyslider
Posts: 574
Joined: Tue May 20, 2008 7:51 pm
Car: 02 IS300 manual/03 G35 sedan auto

Post

GOOD TUNER SHOP CLOSE TO NASHVILLE, ST LOUIS, OR LOUISVILLE? EVEN ATLANTA BUT WOULD BE 4.5 HOUR DRIVE FOR ME.

mattsil80wis
Posts: 67
Joined: Mon Dec 24, 2007 11:19 am
Car: nissan sil80 sr20det blacktop

Post

zerothread/213470

all you need to do is cams and a few other things...check out that thread you almost have the same setup


Return to “SR20DET Forum (rear-drive)”