Help please Rb25det four wires not covered in the Drifting.com DVD

[Voltron240]

What up. I went step by step following the RB25det wiring video I purchased on Drifting.com. Double and Triple checked the video and I still have a four wires I am concerned about. The thicker wire is a light Blue wire that snakes all the way up to the front of the harness. What is this one used for does it need Power? Another one I am concerned about is the Black with the blue stripe that also goes back up to the front. The other two that I am worried about are the brown with the blue stripe and the yellow with the brown stripe these two go to the ECU plug. All of these wires are left over from the Power/Gauge interface clip on the R33(the smaller white clip that clips in under the dash. I have a Series 1 motor into a single cam 89 240. I know that most people hate on the video but it is a hell of a lot easier when you can follow step by step. I searched please don't flame me.

[DRIFTING.com]

What up. I went step by step following the RB25det wiring video I purchased on Drifting.com. Double and Triple checked the video and I still have a four wires I am concerned about. The thicker wire is a light Blue wire that snakes all the way up to the front of the harness. What is this one used for does it need Power? Another one I am concerned about is the Black with the blue stripe that also goes back up to the front. The other two that I am worried about are the brown with the blue stripe and the yellow with the brown stripe these two go to the ECU plug. All of these wires are left over from the Power/Gauge interface clip on the R33(the smaller white clip that clips in under the dash. I have a Series 1 motor into a single cam 89 240. I know that most people hate on the video but it is a hell of a lot easier when you can follow step by step. I searched please don't flame me.

we did not film this DVD, but we forwarded this post to the video producer
Modified by DRIFTING.com at 11:20 AM 5/17/2008

[Voltron240]

Thanks let me know

[DRIFTING.com]

Response;

"Black/blue is chassis ground... the rest should be removed from the ECUplug."

hope that this helps, if you have any more questions then please let us know!