help on tuning with the neo and wideband.

Your premier source for information on the Turbo KA: KA24E-T and KA24DE-T (KA with aftermarket turbo kit)!
User avatar
silviaS13lover
Posts: 489
Joined: Thu Aug 09, 2007 3:14 pm
Car: yellow llama onevia

Post

ok so im pulling the ka out of my car tomorro to swap in the turbo'd one. i have a wideband installed as well as an apexi neo. my set up consists of the following:

rx7 high impedance 460cc injectorssmict3t4 60 triminternal wastegate w/ 8 pound spring3 inch dp

so basically what in and out should i have the neo set to? Also, what numbers should the widband read. i was thinking 12-14. this is for now untill i get the car dynoed later this week. thanks.


User avatar
480sx
Posts: 4085
Joined: Sun Nov 12, 2006 5:27 pm
Car: 1996 Pearl White 240sx

Post

Just do the math yourself and come up with a baseline tune. Stock injector size is 270. You put 460's in, thats about a 40 percent increase. So take 40 percent of fuel across the board, dont boost it, and let the guys at the dyno do the rest.

Dont boost it, again .

If you want to learn how to tune do the research, you can figure out how to do it yourself from the sticky at the top of the page. Ka-T info thread. If your going to a dyno anyway you might as well let them do it so you dont mess anything up.


Return to “KA24ET / KA24DET Forum”