help noob!!!!!!!!!! i'm begging

[tougasm]

I am trying to do a waterpump myself, where are the coolant drains on the engine block? and how to I get the fan clutch off the pulley?I have googled this all day

[tougasm]

I have pulled radiator etc. stuck on fan clutch and hex nut to inlet pipes,they suck

[AZhitman]

Hold please, looking for the info...

[AZhitman]

http://www.nicoclub.com/FSM/300zx/1994/lc.pdf

[tougasm]

Ive seen that, took the nuts off but do i have to loosen the belt because it wont come off

[tougasm]

how do I loosen the belts?

[AZhitman]

There's three pulleys that have a smooth surface. One is a belt tensioner. It will be mounted to a bracket with a bolt running perpendicular to the pulley, which retracts it, thereby loosening tension on the belt.

[tougasm]

thank you!!!!!!!!!!!

[tougasm]

the 2 allen wrench screws that hold the inlet pipes above the waterpump. in are a real b****, I already broke off an allen wrench in one. wtf.

[tougasm]

how about the coolant drain plugs on engine block

[AZhitman]

Leave 'em. You'll never get them to seal up right if you take them out, and you can flush the block once the thermostat is out anyway.

[tougasm]

thanks again, so I tried to loosen the adjustment bolt that allows you to move the alternator i believe, it was rusted that broke off, and I loosened the actual nut to the alty and it still wont move, is there another bolt to loosen? I am referring to thing to the far bottom left, I think its the alt. the belt go to waterpump. I just keep breaking things.lol

[nissanfreak12]

PB Blaster is your friend. What part of the country are you in?