Help needed asap! JGS power steering relocation

[Bosrudorfer]

Can anyone provide me some pictures or a PDF on how to install the damn bracket?

Thanks!

[j-z]

i guess youre serious if you made a thread about it. its plain and simple on how to relocate it. i didnt have any directions either when i did mine. simply unbolt your stock bracket at 3 bolts. position the jgs bracket into place by hand with the oem bracket held up nxt to it to make sure you have the jgs bracket facing the correct way to totally clear the compressor housing. with mine i had to bend the jgs bracket a little bit for it to totally clear my compressor. i removed the rubber bushings that are in the stock bracket. once everything looks like it will clear bolt your stock bracket to the jgs one with the reservoir to the side, and then bolt the jgs bracket in place on the shock tower where the stock one used to bolt to. slide the reservoir in place and voila. dont forget to use the supplied jgs hardware.

[Jookmasta]

got pics j-z? sux that i emailed him about getting one of those brackets cuz i would like to mount it back there somewhere near the factory location but he never got back to me. anyways, would love to see pics as perhaps i can get one made............

[j-z]

the only pics i have is of it mounted on my car. you can click the link in my sig and you might find one that shows it, but none directly of it. its a real simple 3/16'' cut out piece of steel with two bends in it. id just make your own,or better yet get your boy rick to whip something up. btw, tell him to get on here.

[AZhitman]

Why buy a special part?

I mounted mine on the firewall between the brake booster and fender, fits wonderfully.

I cut off 1/2 of the bracket, drilled 2 holes, and mounted it up.

You can see pics in the KA-t forum.

[Bosrudorfer]

Figured it out, it was bend alittle. Here is a picture for anyone in the future.