HELP!! I HAVE NO POWER, AT ALL!! IN ANY ACC OR RUN!

Nissan 300ZX technical discussion forum: Maintenance, performance, installations, modifications, how-to's and troubleshooting.
Z32 8 UR 5_0
Posts: 12
Joined: Sat Nov 21, 2009 4:36 pm
Car: 1994 Nissan 300ZX TT

Post

So,

I was fidgeting with the car trying to fix the wiring mess that was created by the previous owner of my 94 Z32 and I came to switch he put in. I wired it up and when I flipped the switch, done. NOTHING COMES ON! I can put the key in ACC and none of the lights on the dash come on and none of the components work. I checked a bunch of fuses in the passenger compartment fuse box and most of them aren't getting any power as the same with the fuse box that's under the engine bay in the driver side compartment. The fusible link block by the battery on the other hand has power going through all the fuses so I'm assuming somewhere after those fuses is where I'm losing all my voltage. Anyone have this problem before? Any input would be greatly appreciated, thank you very much.



User avatar
evildky
Posts: 14225
Joined: Sat Jan 31, 2004 9:23 pm
Car: 71 Datsun 240ZT
87 Nissan 300ZX N/A-T
06 Nissan 350Z GT
Toyota Tundra TRD RW
Location: Louisville, KY
Contact:

Post

so flip the switch back? or hardwire the contacts of the switch? some paranoids have been known to wire up a kill switch to the ignition switch or the main relay, I suspect thats what you have found, just trace the wires

bentandbuzzin
Posts: 196
Joined: Thu Nov 27, 2008 4:07 pm
Car: 1992 300zx n/a manual 2+0
Location: Middle River, Maryland

Post

My thought as well.


Return to “300ZX (Z32) Technical”