Help do i need these?????

[jautoS13]

does my ca18det needs these to run

engine is going into a 91 nissan 240sx se original engine is ka24deonly reason i ask is cause my harness for my ca18det was cut i bought a euro version harness from a guy in neatherlands but there is no connectors to this on the harness he provided, but every sensor on the engine has a connector all the injector, tps, coil paks, every thing except those items if you can help thanks.... guys just trying to get one step closer to boosting. please please please!!!!!!

[boost_boy]

YOu don't need the little one, but you do need the bigger. It is the injector resistor and your car/CA needs this to run properly and/or run at all. SInce you bought a EURO harness, you're going to have to wire that puppy in manually.

Dee

[jautoS13]

ahhh i see so on the level of difficulty 1- 10 i have mech experience i used to wire up 2inj dx hondas to 4 injector vtec knocks clusters and so forth but i'm confident with honda but new to nissan so i dont want to fry any thing. ohhh buy the way thank you very very much ive been trying to get this solved for about 8 months now... *sigh*.

[jt15833]

i did s13 engine to s14 chassis harness and had little to no experience. if you get a good guide and can follow it, you should definetly be ok. i give this one a 6 / 10

[jautoS13]

cool thanks guys but one more i actually found the plug for the injector resistor but this is not part the wiring what so ever its actually i guess part of the chassis for the uk model, but on japan model its part of wiring harness, so my next problem. is this onei guess its call the power transistor unit any body have a clue on how that can be wired up or should i just keep shooting for a jap spec ca18harness

[dvd]

man i think a lot of honda projects are more complex than dropping a sr or a ca into a s13. We only need to splice in 3 plugs i think. Got any more pics of your car?

[jautoS13]

man i think a lot of honda projects are more complex than dropping a sr or a ca into a s13. We only need to splice in 3 plugs i think. Got any more pics of your car?

yeah but my main harness was cut at the fire wall and im missing the end that plugs into the ecu (sad) so i cant swap until i know i have all the information so i dont end up with my car sitting on jackstands for a year. but yeah. nico will come through, they always do. but at your request heres a couple of my carjust got a Wangan wing, and oem sideskirts but one is a little damage so i have to fix and paint so will see future pics to come.. thanks for your guys info

[ca18det240hatch]

good for you for rockin' advans....i got a set too and i think they look awesome.

[mrzabala]

Yeah I had that on a front clip too. I kept it with the swap I did. I thought It was an aftermarket part. Usually if you have that, it should already be connected into your engine harness. The plugs only go one way and only reach a certain point, enough to go to were there suppose to. Other than lengthing some of the plugs to fit into a lhd. That ignitor (power transistor) will be close to your winishield wiper motor.

[dvd]

lol my car is gonna look almost like yours. what bumper is that? i had a hatchback but bought a 510 then decided to get a coupe. i bought some advans again, same as you, but i painted the face gold heh.

http://img.photobucket.com/alb...3.jpg

[jautoS13]

Gold and polish i like it alot looks good. is the car two tone gold and white by any chance.... did you paint them your self... ohh the front bumper is bomex but i want to get WISE front

[jautoS13]

lol my car is gonna look almost like yours. what bumper is that? i had a hatchback but bought a 510 then decided to get a coupe. i bought some advans again, same as you, but i painted the face gold heh.

http://img.photobucket.com/alb...3.jpg

you got any pics of your car like to see