help..coilover doesn't go anylower

[i240sx]

i slam the driver coilover and the passenger coilover is not even slam n its lower then the driver side. wen i first got the coilover i slam both side and it was even until i drive it on the freeway n i notice when i hit a bump it would scrap inside of fender.and if i turn it all the way it would make like a metal to metal scraping sound.then i rise it up a bit now the driver side doesn't go any lower.i was thinking about switching the driver coilover to the passenger side to see any difference.if not then i think something wrong with my car not the coilover.any suggestion. thanks

[94_240sx]

Were both wheels up in the air when you adjust the height?

[adrianfromthecastle]

are you adjusting preload? or spring perch?

[i240sx]

i did it multiply times.i remember the last time i lower the driver side the passenger side was still on the ground.so did that **** up the car..

[i240sx]

at first the spring was never touch.i just adjust the mount where two bolt screw in, but then it end but the ride height is still the same so i try lowering the spring and it is still the same height.i need help badly

[94_240sx]

i did it multiply times.i remember the last time i lower the driver side the passenger side was still on the ground.so did that **** up the car..

Both wheels must be in the air when you adjust the height. Get a tape measure and measure from top perch to lower bracket or something like that.

What kind of coilovers do you have? Any sign of oil leak?

[i240sx]

ksport...ok thanks 94_240sx

[yokota180sx]

hah ksportexplains it all