HELP, clutch transmission issue, wont go into gear

[starkos14]

so, i get my car inspected today and on the way back i notice the transmission wont go into gears nice, i get to a light, and cant get into any gear. the clutch wont disengage completely when the petal is pushed in. i got underneath and figured i had a air bubble in my clutch line. i watched the slave when my friend hit the clutch, it appears to push the fork all the way to its limit, so i dont think its a slave issue. i tried adjusting the clutch petal. i made sure i wasnt leaking brake fluid from the clutch master cyl. i mean, i am confused. could it be the trans or should i rebleed the clutch? any ideas are welcome cause i tried everything i could on the side of the road. just got the car towed back to my house where it sits and runs, but wont go into gear still

[Justin35ll]

I had the same problem I just adjusted the s*** out of the pedal and now it slides right in, grabs about an inch off the floor, and returns back up all the way.

I would just try reajusting the pedal a lot and rebleed the line too. Any signs of the slave leaking?

Otherwise next thing I would do is drain the fluid and see if there is any metal chips

[tercel drifter]

i would also try readjusting the pedal, same thing happened to me

[starkos14]

its def not the pedal...... i think i broke a rivot on the pressure plate.