help...blower and vent motor not working

[thang nguyen]

Need help. My blower seemed to just stop working one day and my vent motor is acting really weird. Everything else is fine, fuse, relay, and DCC unit powers on a off like normal. Please help.

[slyedog240sx]

pull it out and put power to it.If it turns good,if it don't buy a new moter.

[thang nguyen]

tried it...works fine. is it a relay problem?

[slyedog240sx]

i would say if you swapped to a dcc then it mite be related to a sensor or wiring.Try to check voltage to the motor to see if power is present.might be a relay.

[thang nguyen]

okay i got the blower to work. it was one of the IGN wires being disconnected....now the issue is with the vent motor not working....anyone know why?

[180fan]

is power getting to the blower motor?

[thang nguyen]

blower works now....just the vent motor is not responding.

[pr240sx]

What wire and where its located

I having almost the same problemFuses, relays are okblower does not blow but has 12 volts at the connector.