HELP 89 240sx: A/T to 5 Speed and DE Swap

ONLY for ADVANCED technical discussion about the 240sx!
89_92_240sx
Posts: 2
Joined: Tue May 13, 2003 7:54 pm

Post

I just did a some changes on an 89 240sx. I did a KA24E to KA24DE and an auto to manual swap. After wreaking my 92 240sx I did my best to find another 240sx 91-93, no luck around here, but I found a 89 (no engine or transmission) and bought it for cheap. Nice car, little bodywork needed. Well I just finished all the conversions taking my engine and transmission out of the 92 and putting it in the 89. Replaced all needed stuff, and changed my ECU and wiring harness. This may be a premature question because I have not had time to work with everything just yet. I read in the “Auto->Manual Swap” on 240sx.org that there are wires that need to be jumpered to start it, but not really for sure where they are located with out a factory repair manual. (Low funds HAHA) I just didn't have time to get into it today after finishing up the engine install. Love these cars and can't wait to get this one back on the road. Everything else is up and looking good, just wont turn over until I find the wires. If anyone can provide me with some info, I would be very thankful for it..


User avatar
mattback
Posts: 501
Joined: Sat Sep 14, 2002 4:51 pm
Car: being a big f'ng ricer
Contact:

Post

go to your local nissan dealer and ask them to print up the wirian diagram for the neutral safety switch for the 89 240sx.

89_92_240sx
Posts: 2
Joined: Tue May 13, 2003 7:54 pm

Post

Will do. Thanks.

trpower7
Posts: 1259
Joined: Wed Jul 24, 2002 9:57 am

Post

werd


Return to “240SX Technical Forum”