hello new here

[ssmrico]

got the driver side hub changed no more noise yay and had to add front plate I work on base eh
got to pick up some coils for it

[ssmrico]

when I got the car when I locked all doors it will beep and make the noise to confirm all doors are locked. now it does not do it after my friend tried resetting some settings to clean my remote light car has on.

how do I get to make it beep again how do I turn on that option again? I have looked with the menu on the car but no luck yet fml

[ssmrico]

new pick up for car

[PostalsQ]

http://www.administrationtuning.com/pro ... mafvhr.htm

http://www.modbargains.com/Stillen-Gen3 ... Nissan.htm

https://www.autohance.com/injen-sp1997b ... gQodBdkPsA

These 3 would be my choice. BTW, throttle bodies are a bear to tune. So if you go that route. Talk to your tuner. There's only a few guys able to tune EPS throttle bodies.

[ssmrico]

new intakes on, just need to have my guy build heat shields for them

[ssmrico]

new intakes on, just need to have my guy build heat shields for them

[ssmrico]

was told we don't gain much from test pipes to do headers and catback with intakes and tune

[PostalsQ]

Long tubes or shorty headers?

[ssmrico]

not sure yet. but the hfcs help a lot the builder told me to not worry much about headers and the tuner told me opposite lol ill go talk to them soon

[MY2J]

so did anything special need to be done to fit those Top Speed intakes?

[ssmrico]

nothing special nope just all bolt on

[ssmrico]

just waiting on visors to arrive and to have time to install coil overs

[ssmrico]

these arrived today

[DFW2011M56S]

Keep w/ the synthetic then. Hell, in a warm climate like TX you could go 20-50 and be safe. I ran 20-50 in all my motorcycles because they didn't get ridden in the winter and got reved out repeatedly

I run 0w40 Mobil One in my 5.6s.

[ssmrico]

running 10-30 for now

[ssmrico]

so if I go from 10-30 to like 5-30 or 0-30 if that's even made or 0-40 as stated above what does that change? the lower the first number the thinner the oil?

[ssmrico]

finally installed the visors on the m37 and led fog bulbs arrived

[wideopn11]

Visors look good.

[ssmrico]

Thanks

[ssmrico]

gonna order these heat shields and hope they work on my top speed intakes

http://www.r2cperformance.com/-infiniti ... ntake.aspx

added the led fogs need to take pics of them and also need to install coils unless I sell them

[ssmrico]

ordered these

http://www.ebay.com/itm/Front-Rear-Dril ... 1438.l2649

about to put stock wheels on the car also

[Malbec 56 Beast]

Dude your going all out on your rig! Good job.

Andy

[ssmrico]

slowly. sold coils for now. will install brakes soon along with an oil change and then the trans and diff fluids too

[ssmrico]

got oil done again, and did the ecu reset finally, next week it goes to infiniti and guy I know will do trans and diff fluids, and check alignment and erase a key light I have on and put new brakes on

[ssmrico]

not mys pic , this is an example of same rotors etc I got for my car tho

[DubXSY51]

Like the cross drilled rotors!

[ssmrico]

Thanks they will go on next week this is a pic of a members but its the same ones

[ssmrico]

car got a key light reset it had a bcm code, door creek was fixed, spark plugs changed, diff/trans service, idle air volume relearn, new rotors, oil change, alignment, and brakes bled.

should be good for now until next oil change is due lol

[ssmrico]

got these

[ssmrico]

saw this on another members car and looks good so gonna order it also

http://www.ebay.com/itm/371500557997