Headgasket and Headbolts...Sean

[Nismo1182]

I need the headgasket and headbolts. If anything, I can get the headgasket thru Autozone. But no one carries the headbolts except Nissan, im assuming.

Autozone or Discount doesnt. Havent tried NAPA. Going to go there later today.

Anyone know if the Felpro headgaskets are any good?

[r34 gtr]

you can get ARP head bolts. id reccomend them. not quite sure where to get them but im sure someone else can point you in the right direction.

- tim

[240 Trainee]

There is a thread called head nuts or something like that which discussed ARP bolts, but no answer was given about part numbers. I would really like to know aboutthe head bolts. I have a link to a place that sells a metal head gasket, if your interested. Alittle over 100 dollars.

[Rage_sixtynine]

I think we would all be interested in a metal head gasket for a little over $100. I know i've had a hard time.....i'm sure I'm not alone. Please share. Thanks-Trent

[240 Trainee]

Metal Head gasket Here it is. In the HKS part, there is a head gasket for CA18DET for $119. I have not had any expierence with this seller or the product, I just know it is there.

[pulsar gtr]

I have asked previously on this forum about the bead metal headgasket, and some one says that it isn't that good. I placed my order through http://www.c-red.com.au/contact/index.shtmlover a month ago but still haven't got it or billed for it, I have to email them again.

if you do find another place in northamerica please let me know.

Thanks,

PULSAR GTR

[CA19DET]

boost_boy posted the correct part numbers i think, i also posted my photos and part numbers, my bolts were too short and since then have been replaced by ARP, i'll post the new part numbers next week... (going surfing this weekend (wohoo), no time to go to the garage and pull parts)

[NeedCAforS13]

Headgasket: 11044-01Y00 : List: $48.45 Cost: $29.07Headbolts: 11056-D4200: List: $3.35 Cost: $2.01 x10Washers: 11058-16A00: List: $1.33 Cost: $.80 x10

Your cost will be somewhere in between List and Cost... I pay 10% over cost, and will do my best to get you right around there... plus tax of course:)

Call me Kev, I'm going into work today for awhile... I can place the order for you and you pay me when they get in.

Sean

[Nismo1182]

Oh hell yea

Place the order, please!

I got cash in hand right now.

So with my calculations including tax and 10% over cost you mentioned, it all comes out to ~$65

Thats way less than I was planning to spend. I'll take ya out to lunch too for helping me out with everything

[NeedCAforS13]

CALL ME!!! what part of that did you miss;) Sorry, my credit card is maxed out, so I guess I'll order the stuff, but you have to pay me before I can pick it up... or just meet me up there. I'll be working again wednesday, but I'll call in the order to Kris tomorrow:)

Sean

[Nismo1182]

Sorry I was busy the whole day. I tried calling you but no one answered

I'll call you today. I'll bring the $ up to ya.

[NeedCAforS13]

lol, its ok... I guess my phone might have been off (I get crappy reception at work in the garage for some reason?) I'm going to Amazon Hose to try and find some silicone connectors with Mike now, so I'll be around in the afternoon:)

Sean

[Nismo1182]

Please hurry. 2 Mazdaspeeds and a VW GTI wanted some of the 240 last night but I couldnt race

Though my buddy with a GT 5.0 Mustang with 3 people in his car whooped them all and then we raced for fun with 1 more person in my car and I had him till then end when he started creeping up on me :ylsuper

But still, its not the same as it was with the motor in the car :help

[CA18Fastback]

hey sean,

do you happen to have those extra flywheel bolts and maybe the pressure plate ones too? can you get on aim for a lil bit?

thanks!-ian

[NeedCAforS13]

I still don't have my new motor Ian. I'll get on AIM now

Sean

[Nismo1182]

Im going to call you around noon, Sean. Or give me a call.

[deffe]

NeedCAforS13: I would like to buy a set for my car (Head gasket). How do I contact you ?