head unit removal.??

[R350Zz33]

how do u take it out? if i take the 2 screw i can get to out will it pop out?

[R350Zz33]

bump do i need any special tools ?

[xjmxstac]

You need to remove:

1)Shift boot panel2)Climate control cluster3)Center dash including the gauge cluster, cubby hole/navi compartment

Then you disconnect the climate control module unbolt 2 screws that hold it in place and remove. Unbolt 4 screws that hold the HU's mounting bracket and the whole thing pops out.

[R350Zz33]

it looks difficult on the auto because i can grip under the panel (under the shift boot like you can the stick one.

i'm trying to hard wire my navi

[xjmxstac]

If you can figure out how to remove the knob, all you have to do, from what i can see, is to remove the aluminum (colored) ring around your shifter (with a flat head) and pop the panel out (like what soup did). The panel should clear the shifter without the knob on it. I advise to put some tape on the location where you plan to use the flat head so it doesn't scratch your plastic.

[R350Zz33]

i figured it out y would i have to take the knob off that makes no sense what so ever.

[xjmxstac]

I found it easier to remove the Climate Control Module and HU without the knob getting in the way. BTW, I was trying to help you ***hole! You can at least show some appreciation d!ck.FYI its spelled whatsoever, e.g. Your spelling and grammar makes no sense whatsoever. Have a nice day biatch.

[rmezz13]

i figured it out y would i have to take the knob off that makes no sense what so ever.

wtf richie...

[R350Zz33]

the whole shifter assembly comes off in one piece, and its b**** not biatch

[rmezz13]

i was looking for an apology or something like "i didn't mean it the way its sounds, my bad"....You FAIL...... You ruined a good thread that YOU made WTG

[Bubba1]

the whole shifter assembly comes off in one piece, and its b**** not biatch

You ask for help, someone tries to help you, then you flame them.

You owe xjm an apology.

[audtatious]

I found it easier to remove the Climate Control Module and HU without the knob getting in the way. BTW, I was trying to help you ***hole! You can at least show some appreciation d!ck.FYI its spelled whatsoever, e.g. Your spelling and grammar makes no sense whatsoever. Have a nice day biatch.

This thread is full of FAIL! No reason to take it to that level. Take this as a warning.