Head gasket kit

[Nissangirl13]

Could anyone inform me where all teh gaskets go in the head gasket kit?

[gumby74]

If you have pictures of the individual gaskets this would be muuuuuuch easier.
Big shiny one with 4 big holes=head gasket
small blue ones will cover your water outlets. roundish triangle with 3 bolt holes=thermostat.
small blue rectangle with 2 bolt holes= water outlet right below thermostat.
There should be 2 grey gaskets with 4 holes a piece, these are for the intake manifold, and intake mani to head.
Square gasket with a big hole and 4 bolt holes (one at each corner)=throttle body.
Round gasket with a big hole and 4 bolt hole ears= oil filter housing to block.
There should be a pair of copper or brass seals with a rubber lining, these go on the front engine block, passenger side. These seal the 2 oil channels on timing chain cover to block.
There are the exhaust manifold gasket(s) prettu self explanatory.
The rubber valve cover gasket=self explanatory. spak plug hole grommets and a small assortment of rubber o-rings for the injectors.

Damn, I must be pretty bored.