Haynes Manual Nissan / Datsun Trucks

[KainNemesis]

Hi, a question, someone will have this manual that I provide, take a walk a 1981 Datsun 4x4, which was two years dead, but still has the details and I would like repair, if someone would greatly appreciate if you would share it with me .

[Rev_D21]

Welcome to NICO. I guess I don't follow what you are asking. I have a Haynes manual for your truck but even better I have the actual 1981 Datsun 720 service manual from a Nissan dealer. What info are you trying to find?

[KainNemesis]

actually, I like to have the entire manual, but the network does not exist in digital format, the problems with the truck are a damaged kneecap, the carburetors are sometimes fails, and the hot air does not work, several details. I would greatly appreciate if you will provide me a copy. greetings.

[Rev_D21]

I can scan sections of the manual but the book stays in my personal collection, I don't sell I only collect. Kneecap? That's a new one to me.

[KainNemesis]

Sorry is not english well, but that piece is part of the suspension of the truck, my intention not have a printed version, for a long time he wanted the digital manual in format pdf, scan me like to have it, is that is a difficult task but what i look. Thank you for your attention and kindness.

[Rev_D21]

Front suspension? Or rear? Did you mean knuckle?

[KainNemesis]

the front suspension, the mechanic told me that this very dry, the truck was stopped 2 years. when driving a knocking is heard is really a squeak about the lack of fat in that part. but I was told you can not lubricate so I have to replace it.

This is an image similar to the part I mean. Thank you.

http://www.autopart007.com/product/niss ... 2?lang=esp

[woodbutcher5691]

Kneecap= ball joint.
What part of the world are you in? A haynes manual Is $30 around here.

[rontwo]

Kain give me your mailing address i will send u a haynes manual. I just got my truck recently and love it! Ive been looking for parts online and buying them even if i dont need them.

[rontwo]

My email is [email protected]

[KainNemesis]

Iam from Mexico. My email is [email protected]

[PEZi]

For what it is worth... I plan on scanning the full Haynes when I get the chance. Problem is that the scanner I have isn't mine and is not connected to my computer... I may just go to a copy shop and see if they can't help in some way. When I'm done, I'll put mine up for sale!

[monstas23]

hi! I'm from Trinidad.... tryin to find the same manual to try and DIY on my 720.... would you please send to me ........ [email protected] .... want to overhaul the suspension..... thanx

[PEZi]

Here is the thread I made for overhauling the rear. I don't have one for the front, but this will get you going!
rear-suspension-rebuild-t527052.html

[FricFrac]

Has the FSM been scanned in as a PDF yet? Looking for the NAPS Z22 section in particular. Thanks!

[breadbox]

what in particular about the z22? Almost everything is done to the spec of z24, as far as breakdown and build up processes. I can look in a another book I have and see if it has a specific z22 chapter.

[breadbox]

I have info for z22 in regards to 200sx's so Its probably very applicable.

Engine Displacement 133.4 CU 2181cc
z22,z22E 4cylinder SOHC

year 82-83 fuel EFI 102hp@5200rpm 129tq@2800 BorexStroke 3.43x3.62 in. compression 8.5:1

spark plugs BPR6ES gap 0.033 in. ignition timing 8 deg before tdc

idle speed MT 750rpm AT 700rpm valve clearance intake and exhaust the same at 0.012 in.

Oil with filter 4.4 without filter 4.1 I have camshaft specs crank and rod specs Valve specs Piston and Ring specs and general torque specs for a bunch of motors.

Also I have a haynes manual for the 200sx of 80-81 so it has Z20 info in that.