Having Clutch problems with my 240sx................ Please Help

[Taino_96_sr20]

Ok i just changed my clutch, throw out bearing,and my master cylinder also removed my dampener box .When i go to bleed the slave it gets to much pressure and the spring in the slave pops the metal thing in the slave to far and it pops out and i loose pressure my ? is do i have to adjust my clutch pedal after changing the master cylinder!or could it be something else! And im on my 3rd slave cylinder im using a z32 slave cylinder please help me!
Modified by Taino_96_sr20 at 3:28 PM 11/22/2009

[cleopp3]

Ive had the exact same thing happen to me, after i replaced the same stuff. JUst get the clutch pedal (turning the little rod) specs right. since removing the dampener changes the play in the rod. I would order an oem slave because until I ordered mine they just kept popping.

[gumby74]

Dial back the adjuster on the pedal a few turns and adjust accordingly.

[Taino_96_sr20]

thanks im gonna try this then ill let everyone know the results :