My 93 dohc trans doesn't have a dust collar. And i can't use the sr one.
I have came down to two different options. Ether buy a ka dust collar(which i can't find) or could i cut the sr down about a 1in. or so. So that the shaft will fit in side the transmission with a dust collar.
Thanks
Have one problem with my swap.
-
OM3GA
- Posts: 3041
- Joined: Fri Apr 14, 2006 11:41 pm
- Car: A Sexy Mobile, 1993 Nissan 240sx 180sx Hatcher
Re: Have one problem with my swap.
Mine is removed, along with a lot of other peoples. Just don't use one, its really not even anything to worry about. A few driveshaft companies actually claimed that you would need to remove that dust sleeve in order to fit their driveshaft.
-
conno707
- Posts: 172
- Joined: Sat Aug 15, 2009 2:01 pm
- Car: R.I.P. 1990 300zx 2+2
1993 sunfaded s13 hatch 4x4 - Contact:
Re: Have one problem with my swap.
Alright
Thanks
Thanks
-
Blown240sx
- Posts: 1963
- Joined: Thu Apr 21, 2005 3:20 pm
- Car: 1996 240sx
Re: Have one problem with my swap.
get rid of it.
-
PyR0NiAk
- Posts: 3851
- Joined: Sun Mar 01, 2009 4:29 pm
- Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
- Location: Ohio
- Contact:
Re: Have one problem with my swap.
He already said that.Blown240sx wrote:get rid of it.
OM3GA wrote:Just don't use one
-
ciscos13
- Posts: 149
- Joined: Wed May 05, 2010 4:53 pm
- Car: 89' 240sx hatch, s13 sr
- Location: Phoenix, AZ
Re: Have one problem with my swap.
my dust collar didn't fit on mine either, so i took it off from the sr transmission, took my electric saw and cut it in half. it fit perfectly.
-
conno707
- Posts: 172
- Joined: Sat Aug 15, 2009 2:01 pm
- Car: R.I.P. 1990 300zx 2+2
1993 sunfaded s13 hatch 4x4 - Contact:
Re: Have one problem with my swap.
This is what im considering.ciscos13 wrote:my dust collar didn't fit on mine either, so i took it off from the sr transmission, took my electric saw and cut it in half. it fit perfectly.