hatchback door windows

ONLY for ADVANCED technical discussion about the 240sx!
Dirtylou
Posts: 666
Joined: Mon Oct 25, 2004 4:27 pm
Car: 1991 Nissan 240SX RMS13

Post

'Sup doods, I'm just wondering if anyones s13 windows leaks through to the interior. I noticed that on my car ('91 RMS13) the glass didn't seem to seal enough to be completely water proof when I was washing it. Is this a common problem? I'm probably going to end up getting new weather stripping anyway cuz leaking windows aren't cool. Also while I'm in I'd like to get your opinions on the Apexi N1 dual for either SR's or KA-T's; is the mid-range really noticable; is the top end compromised? By the way the initial plans for the car is some reupholstering to the seats and door panels and the glove box. Don't know who at nissan came up with the cloth on the glove box because I don't dig it. Also, some coilovers too. I can wait for a turbo or SR. I figure I can keep the SOHC VTECs and non VTEC B18s ricers behind me with the good ol' KA(No disrespect to the B and K series VTECs though). As always your comments are appreciated. }Peace>


Florida240sx
Posts: 11114
Joined: Thu Jul 01, 2004 7:17 am
Car: 1993 Nissan 240SX Hatch 5spd
2012 Nissan Altima S coupe 2.5
Location: DeLand FL

Post

Where is water leaking into your car from? I have water come in through my dome light.

Dirtylou
Posts: 666
Joined: Mon Oct 25, 2004 4:27 pm
Car: 1991 Nissan 240SX RMS13

Post

It's coming through the edges of the windows. It's not really bad but a couple beads of water find their way in.

i2ice4m3
Posts: 713
Joined: Mon Dec 30, 2002 2:11 pm
Car: COUNTERSTRIKE!

Post

you can adjust the windows so it'll seal correctly. Just pop off the door panels and look for 4 nuts with slotted bolts. There's 4 of them to adjust each corner of the power window frame. Tinker with those a little and i'm sure you can get the window to seat more snugly.


Return to “240SX Technical Forum”