Has anyone used ES 7.5118G 20mm anti-sway bushings?

[OwnerCS]

The OEM rear Q45a 20mm anti-sway bar bushings make a creaking noise that becomes irritating in the winter. I've used some silicone grease to quieten the noise a couple times in the past. I noticed that I have a set of ES 7.5118G 20 mm poly bushings for a Maxima/I30 front anti-sway bar.

Has anyone tried ES 7.5118G 20 mm poly bushings for the rear anti-sway bar?

[Infinitiguy19]

I have the black energy suspension bushings in the rear, No grease fitting. I am getting a creaking noise over bumps when going at parking lot speeds. The front sway bar bushings are the greasable ones. But I get the same creaking noise from the front and rear.

Happy New Year!

[dnudelman]

I have the rear bushings for the q45a rear bar. Mine are greasable. no complaints.

[OwnerCS]

Happy New Year Paul! After a second look, the Maxima bushings are too small. I found a new looking set of Q45a bushings in my parts stash. I think I'm going to try "Synthetic Green Grease" this time as it is supposed to be good for boat trailer bearings that are submerged in water. I also have some "Red Grease" I could try.

The Green Grease MSDS:

Distillates, petroleum: solvent refined heavy paraffinic: 30-50%
Residual Oils, Petroleum: solvent-refined: 10-30%
Lithium Carboxylate: 5-20%
Carbonic acid calcium salt (1:1): 1-15%
Polyisobutylene: 1-15%
Proprietary Ingredients: 1-5%
Zinc and zinc compounds: 0-1%

[OwnerCS]

I have the rear bushings for the q45a rear bar. Mine are greasable. no complaints.

Did you find some with grease fittings or did you add fittings to the stock bushing mounts? I would sure like to install some with fittings.