haltech e6k woes..

[StricNyne]

i own a rb27dett (yes a bored and stroked 2.5 with twin turbos more on that later) and i am going to be using a haltech e6k that i picked up from a forum. My first issue is that i dont have the original rb25 harness so i am missing some plugs and sensors, i was told i could use plugs from another motor so first i wanna find out which ones i can use,in their place. my other issue is that i am basically STUMPED with this. i have ton of wiring experience but with this i am lost, i was told i dont need to wire up everything then i was told i needed to, so i need to find out exactly i need to wire up to get my motor running right, i have the haltech ign module, but i also do not how to do the ign wiring, i am one of only people with this unique setup in america so help is very scarce, any suggestions would do me wonders !!

[StricNyne]

pics

http://img180.imageshack.us/im...1.jpgh ... im...8.jpg

[themadscientist]

nothing unique about it actually. you need to hook up an air temp sensor, water temp sensor, either a flying magnet on the crank pulley or OE CAS, get the injectors wired up and coils firing. If memory serves the E6K can't do anything but batch fire and waste spark on a 6 so that's solved. What's the problem? Do you need the manual?http://www.haltech.com.au/downloads/e6kv9man.pdfwiring diagramhttp://www.haltech.com.au/downloads/E6Kdiagram.pdf

[StricNyne]

ahhh i got both of those, imma order those this week and go from there, i considered having a shop do it, the same shop that is gunna tune it for me

[StricNyne]

looks liek this will solve some of my problems

http://www.spooledmotorsports...._Pack