GUYS need some help / advice with sr20det!!!!!!

[dan halen]

ok long story short HAD a ka24e fresh rebuild new everything basically completely rebuilt! caught on fire now it looks like a pile of s*** lol so im wanting to do a sr20det swap !i have done research but im looking for opinions and stuff along where to get the motor and etc

my eyes have been set on the ENJUKU basic swap package !!!!if you have a different opinion then let me know, possibly cheaper lolim open minded to everyone that replies an grateful as well im pretty much going to do this by myself in a barn ( welcome to Tennessee engineering)and any one that lives close that would be willing to help ( there will be lots of beer )(gotta love southern hostility )but my question is what else will i need besides all of this ? and a ka24de harness?

Package Includes:S13 Redtop SR20DET Motor Set - Motor Set Includes: Motor, Trans, ECU, Uncut engine Harness, MAF, Ignitor, PS pump, etc.ISIS FRount Mount Intercooler kit - Hotpipe w/ Flange - HKS BOV - ISIS Downpipe - SPEC Stage 1 Clutch - Walbro Fuel Pump - Cone Filter Kit - AutoMeter Boost Gauge - AutoMeter Single Gauge Pod - 2 - ISIS Electric Fans - ISIS Aluminum Raditor - ISIS Silicone Radiator Hoses - Heater Hoses - thanks for reading all this s*** and thanks for the help

[zach-Ka]

It seems like a good deal to me. If you can afford that much up front.Enjuku is an absolutely amazing company to deal with.Just set aside about $500 extra for other random things. Clamps/ vacuum lines/ fluids/etc.All that adds up quick. If you need the help just e-mail me, I live in Greeneville.

[dan halen]

thanks alot man !!!!i've just been sketchy with some of these engine company's i just don't want to throw down that kind of cash and get ripped by someone hustling motors lol i guess thats where the saying you get what you pay for i was wanting to get a front clip off ebay but again it just seems sketchy ( want a front clip mainly for the conversion but thanks again man i will keep in contact

[zach-Ka]

I love enjuku their costumer service and shipping is amazing. At no point will you not know what is going on with your shipment.My friend got a front clip from JGY customs for 2600 and just cut his car in half and had a shop wild the whole front on for $500. I wouldn't have done it but it seemed to have worked out for him.He basically got a Sil-80 $3400 thats including buying a 240sx that was wrecked in the front to weld the clip on.

[dan halen]

well i was going to get a clip and just take off those parts lolwielding it on is a little dangerous in my opinionbut yeah enjuku i have heard alot of good with product and service

[zach-Ka]

I would just get the swap package then man.

[dan halen]

yeah it seems that enjuku would be safe place to get it from plus i have a feeling that it would be a better motor then getting it from ebay or some other companies thanks for the help tho man i appreciate the time you took to respond NOW just to get all the money for it !!!!

[zach-Ka]

Thats the hard part. Good Luck...

[dan halen]

tell me about it man im selling everything i can lol

[jonnyd218]

i just got my swap from enjuku last week and i am pretty pleased so far, gettin ready to drop it in today. the customer service was great! I Spent 6,200 on my swap but that inclulded a 5 speed swap and a bunch of extras since i got a discount for adding parts to the package. Ken from enjuku even sent me a video of the engine running.

And if you want to run power steering i suggest the DOHC P/S lines.

[dan halen]

good deal man im glad that some one posted that had gotten a motor from them that makes the comfort level extremely higher thanks alot man !!!do you still have the video ??

[jonnyd218]

yeah you got an email address

[dan halen]

[email protected] alot man !!!

[jonnyd218]

you should have it now....if u got any questions jus let me kno

[dan halen]

that's clean and sounds nicehow long did it take you to get it ?

[dan halen]

do you have any pics of it currently my computer isn't letting me go to face book for some reasonthanks for the help man

[jonnyd218]

bout a week and half if that. got all my parts within two weeks and i just ordered a new turbine outlet that should be here by the end of next week.

those are the only pics i have online they are current and i update them any time i do somthing. i can email you a few.

[dan halen]

im signing up for face book im going to send you a request

[jonnyd218]

ok sounds good