Guaging Interest (Part Out HELP)

[SillyRB]

Well i have come to a point in my life where it is time to part out my car. The set up i have has put down an easy 538 rwhp and 463 lbs of torque on only 26~ psi of Boost. The Motor has a Fresh Rebuild with ALOT of Goodies, the Bottom End was profesionally put together by a reputable Machine Shop.

By This thread i was hoping to Gauge interest for alot of the things i have. There are no prices as of yet because this is not a direct for sale thread yet. I wanted to see what people on this forum needed and get a rough idea of what i could get for alot of the things i am parting out. I would love and am intrested to see what fellow RB owners think. I am Accepting offers, if someone wants to buy in BULK i will cut them a GREAT DEAL !!

ENGINE MANAGEMENTMicrotech LT-12 (3 Bar Map Sensor / wired for RB25DET / 240sx) - Microtech Dash Unit

Greddy Intake Manifold

Custom Dual Feed Fuel rail

MOTOR (RB25DET 1997 SII)-CP Pistons (Bored .020 over)-Calico Coated Rods & Main Bearings-1.2mm Greddy Head Gasket-ARP Head Studs-Ported & Polished head-5 Angle Valve Job -New Valve Stem Seals-Shot Peened Rods-New Water Pump & Oil Pump (OEM)-Motor Freshly Re-assembled by P.C.C Automotive in Summer of '05**Motor has less then 2000 Miles**Would replace Oil Pump with Aftermarket

1997 GTS-T TRANSMISSION-RPS Clutch (Less than 2000 Miles)-OEM Re-surfaced Flywheel-Mines Short Shifter

TURBO KIT / MANIFOLD-Custom Equal Length Exhaust Manifold-GT40/Turbo .81 A/R T4 Flange (Rated for 780whp) LESS Than 500 miles -3.5 inch Downpipe-4 Feed Line / -12 Return Oil Line

INTERCOOLER / PIPING-PTE Intercooler (Rated @ 750whp)-Intercooler Piping for RB25DET with use of FMIC

DRIVETRAIN-Custom Driveshaft-Custom Solid Motormounts-J30 LSD with Axels

RB26DETT Gauge Cluster

**Please do NOT move to the Classifieds**

When i decide on prices and am ready to sell i will set up adds in the classifieds**

THANK YOUyou can contact me at

[email protected]

[email protected]

AIM--> Slowasssilvia

[Joe]

"gauging interest and taking offers" is a for sale thread. period.

im not gonna move it because thats one hell of a setup but i am going to lock it. sorry dude. use the classifieds thread or forum please.