GT3076 and stock exhaust manifold......

[al_v]

Please , can someone tell me if a garrett GT3076 with internal waste-gate , would fit in my S14 chassis with the stock exhaust manifold?????

Thanks.

[Darius]

Search. Covered twice in the past three months. Look for lucky7's thread.

[al_v]

Search. Covered twice in the past three months. Look for lucky7's thread.

Ok , I did a search , but I would like to see some pics , to see the turbo clearance in the engine bay....

[Darius]

Oh in that case, you need a 1/4" flange to space the turbo out away from the valve cover. This requires longer turbo flange studs and an extra gasket.

[al_v]

Oh in that case, you need a 1/4" flange to space the turbo out away from the valve cover. This requires longer turbo flange studs and an extra gasket.

Ok, thanks for the info , but someone have a picture of the engine , with stock manifold and a gt3076 or a gt3082.......

[Darius]

If you ask nicely, maybe cdorhout could post a picture of his setup.

[Shocker]

If you ask nicely, maybe cdorhout could post a picture of his setup.

or he could search for it.. I do believe its in the engine pic thread.

[DETurbine]

Yeah a simple 1/4 to 1/2'' spacer and some longer studs will work. I fit a Precision SC61 on my stock manifold with a 1/2'' spacer and some longer studs.

[Shocker]

^^^ WTF have you been? lol

[Darius]

or he could search for it.. I do believe its in the engine pic thread.

I am pretty sure he only has his stock turbo pic in there. I'm not sure if he has updated it in that thread or not.

[rb24t]

i have an extra spacer flang and even a spacer that allows you to run an external gate

15 shipped for the spacer flang

25 shipped for the extarnal gate flang.

[cdorhout]

Hope this helps you out.Let me know if you have more questions.

I bought my turbo from horsepowerinabox.com . It's the aftermarket turbine housing with the same bolt pattern as the stock turbo.

[al_v]

Thanks for the pics. You buy the turbo from horsepowerinabox.com for a real bolt-on solution , but the turbo is very expensive there ( more than U$2000 ) , anyway, I will get a gt3076r with internal waste-gate , with t3 inlet flange, and 5 bolts outlet flange , I will make a new dump pipe because the stock one is very close to my steering column and is hitting it.Do you have the .63 or .82 turbine A/R ?????

[lucky7]

i have my FPR. my injectors are on the way. and my car is going into the shop for turbo install and tune in late april/early may. i decided on a 3071R with .82 a/r housing. should be in the low 400's and VERY streetable.

[cdorhout]

$2,000+ ?? Yikes! I paid $1,500, which is a lot of money too, but not quite that high. I suppose the exchange rate is screwing you right now.

The turbine that he supplies is custom, so it's not the standard A/R of other Garrett turbo's. I forget what it is now, and I sent an email to Morrie to get the right answer for you.

I use this turbo in conjuction with the Syko O2 houseing and cheap Megan SR20 downpipe. It works great with lots of steering clearance.

I LOVE this turbo though.

[Darius]

That is way too much to pay for that turbo! You can get it for $1250 at ATPturbo. I thought Bwana could get ahold of Garrett turbos for a good price too. Isn't he affiliated with a NICO sponsor somehow??

[DETurbine]

That is a good question..lol. I have been around, get on here ever once and a while. RB has been sitting for a while, but finally finishing it up over spring and thought I would get on here agian

[cdorhout]

Well DETurbine, get that thing running before this year's Ice Cream Cruise or whatever they're gonna call it.

I ran into you last year, and this year Darius is gonna be there too.

[bumblebtuna]

i still can't make up my damn mind30r or 35>...........................

[DETurbine]

Yes I remember. Brought your s14.5 up on our cruise down here. I will be out with my car hopefully by then, so I will enjoy meeting you again and Darius as well. Should have my other buddies RB25 S13 out and hopefully I can get my other buddy to bring out his fully built 611whp SR S13 this year.

[cdorhout]

I just verified that this turbine has A/R .73

[al_v]

I just verified that this turbine has A/R .73

Hmmmmmmmmm , a little small for a 2.5 engine , you would have full boost around 3600-3700 rpm, with that A/R. I will choose a .82 A/R , and hope to have full boost around 4000 rpm.