Group Buy Feeler - M45 Mod

[Sentientbydesign]

The guys over at InfinitiScene asked RadioActive Motorsports to custom design a super light weight crank pulley for the VK45 engine (FX45 and M45). We stepped up to the challenge and are now looking to see who will be interested in buying one.

Estimated HP gains are in the 5-10 HP range depending on supporting mods. The final design is only 1.5 lbs. That's less than 1/3 the weight of the OE pulley.

I need to get approval from the powers that be prior to starting an official GB, but wanted to see who would be interested. Pricing is at or under $200...

There is NO issue of oil leaks or crank seal wear due to the OE shaft being utilized with our design.


Nate@RAM

[Royal1262]

I'm In!

[wizard8873]

def interested here

[frankster102]

Im in if it is good for 08 infin m45x, and how hard is it to install - is a shop needed instead?

[Sentientbydesign]

Awesome. I think we'll be able to make this happen. I'm waiting on information from my techs to see if this is a DIY or strictly mechanic install, but either way it should be a pretty quick installation.

[PMIRO2]

If it is dyno proven and a DIY, I will most likely purchase.

[DaSerb]

Interested ... just have to get R2C intake first but this would be my second mod if it happens.

[alend619]

INTERESTED !!

[Sentientbydesign]

I've already started taking deposits at IS. We need 15 deposits for tier 1 pricing and there's a nice discount if we hit tier 2 pricing at 25 deposits. SPREAD THE WORD!

[EniGmA1987]

These wont fit right for an M35 right? Balance would be different?

[Sentientbydesign]

We already offer pulleys for the M35. Email me for details.
[email protected]

[06M4.5]

Estimated hp gains should be posted without supporting mods.

Install one on a stock M45 and post the gains.

Can you tell use what was the gain on a stock M35?

[Sentientbydesign]

Estimated hp gains should be posted without supporting mods.

Install one on a stock M45 and post the gains.

Can you tell use what was the gain on a stock M35?

The VK45DE Pulley is being manufactured as a special request group buy. Installing one pre-production isn't an option. Supporting mods, the dyno and EVEN the program on the dyno will all affect final numbers. The true selling point on this mod (and the reason I want one on my evo despite the fact that we don't make one for that platform) is acceleration. But the average gain on a dyno should be in the range of 5-10 hp depending on the aforementioned variables.

GB on IS is already at 8, we need 7 more to make this happen!

[Rishi1331]

I'm in....

[Sentientbydesign]

Those of you who are interested in this, PM me so I can fill you in on the details. If we get all of the deposits in before new years, we can potentially have these in 4-5 weeks.

[SiMpLyMoDiFiEd]

Would love to but timing sucks for me

[Twizz]

Do you have a website ? I have a 35 and may be interested in this.