greddy kit on a 95 .. Anyone here have it here??

Your premier source for information on the Turbo KA: KA24E-T and KA24DE-T (KA with aftermarket turbo kit)!
NickWendt03
Posts: 124
Joined: Sat Jul 02, 2005 6:31 pm
Car: 95 240
Contact:

Post

I have a 95 240sx and im set on the greddy kit. I wanted to know what kind of tuning has to be done because i dont have OBII??? And if you have this kit what do u think of it??

thanksnick


twinturbozs
Posts: 59
Joined: Fri Jul 29, 2005 8:10 am

Post

ive read some have had problems with the CEL possibly with the idle control. the other problem was with the wastegate being too small allowing for boost creep when you have an aftermarket dp. not too sure about the OBD2 though. I doubt that should be a problem though.

User avatar
93RPS13
Posts: 1238
Joined: Wed Jan 01, 2003 5:19 pm
Car: Cars, Girls, Cars, Food

Post

yea i would like to know too, becuase i searched i remembered there being at thread on it but i couldnt find it. ..

Colorado_S14
Posts: 25
Joined: Fri May 06, 2005 1:13 pm
Car: 97 240sx Greddy KA-T

Post

I have it on my 97' the 95 should not be an issue. You will have to confirm the eManage wiring on the 95 ecu.

You will want to retune the eManage anyway, the tune that comes on the box from Greddy SUCKS. Tune it yourself or pay someone to do it.

User avatar
Red-KAT
Posts: 658
Joined: Sat Feb 28, 2004 6:05 pm
Car: 1995 240sx-se ka24det
Contact:

Post

The wire'ng is the same from 95 to 98... ODB2 is not an issue.

And yes you get bad boost creep if you do full 3 inch... it will hit about 15psi.


Return to “KA24ET / KA24DET Forum”