greddy intake manifold install
greddy intake manifold install
Hey Just got this intake manifold but im having trouble connecting everything to the right place. Does anyone know of a install guide or have a link with pics and instructions thanks
-
doridori23
- Posts: 271
- Joined: Wed Jun 13, 2007 11:43 am
- Car: 1996 SR20deT 240sx (mine) , 1998 KA24de (wife's)
Re: greddy intake manifold install (mass2234)
Everything goes as per the pic with the install guide. I know its written in Japanese but the pics speak for them selves. What part specifically is messing with you? I have to redrill a hole on the TB linkage mounting bracket but I am running a larger than normal TB.
Be careful with your torque on the bolts. On the studs you can go a little tighter but the bolts are threading into aluminum and it is easy to strip the threads right out.
Be careful with your torque on the bolts. On the studs you can go a little tighter but the bolts are threading into aluminum and it is easy to strip the threads right out.
Re: greddy intake manifold install (doridori23)
has anyone used those ebay manifolds?
-
cheapscheisst
- Posts: 421
- Joined: Thu Nov 30, 2006 12:42 pm
- Car: 1996 240sx w/ Kouki front end
Re: greddy intake manifold install (nani)
what have you guys done about the cold piping to modify it to fit with the greddy manifold?
Re: greddy intake manifold install (nani)
I got one on my car nownani wrote:has anyone used those ebay manifolds?
-
doridori23
- Posts: 271
- Joined: Wed Jun 13, 2007 11:43 am
- Car: 1996 SR20deT 240sx (mine) , 1998 KA24de (wife's)
Re: greddy intake manifold install (cheapscheisst)
Running a GodSpeed setup from SBR and I did not need to do any mod to the piping as it has a nice joint where it comes through the battery box so all i did was rotate it about 1/2"cheapscheisst wrote:what have you guys done about the cold piping to modify it to fit with the greddy manifold?