Greddy Cams

[bp2ooo]

I am interested in getting greedy cams, mainly because i am trying to stay with one company as much as possible. I was just wondering if anyone has installed greedy cams, and cam gears and what type of improvemenet they have seens vs hks cams, or toda cams. I will probably get 264 degress with 10.5 lift, because i will want to keep the car as street able as possible. Also do you know any websites that sell greddy cams. I searched for a while, and find them for alot of cars, but not sr's. I wish greeyd updated there website more often. Thank you.

[I H8 UR DSM]

You're not going to find anyone on this board (AFAIK) that has tried greddy and HKS, or toda cams...Contact MTS, they have experience with all the came on the SR...i can tell you they will recommend HKS....and that whole "staying with one company" goal really should be more thought out...different companies make different parts better than the others...mix and match for maximum performance...the only reason anyone uses all one company is if that company is building the car, going for sponsorship, or works for that company (even though that doesnt even hold true 99% of the time...)

"if you have any. questions please feel free to call an ask. hours are 10am-5pm Monday-Friday Rick 1-321-624-2970 or Jonathan 1-718-216-8111. please remember there is no such thing as a silly question.you can email us at [email protected] and [email protected] God bless"

Jesse RPI

[Movingviolation240]

264's even lump a bit on idle, my buddy's car sounds almost like an RX-7 with them in it.

I personally like HKS cuz it's decient quality and cheep.

can't go wrong with TODA though.

[bp2ooo]

the main reason i am staying with greddy is honestly i think they make some really nice stuff. If there cams are as good as there other products i would be interested. The only thing i didn't get greddy so far was the dp, because its not stainless steel, so i went with blitz. If i went ahead and got hks cams, i could use toda cam gears right? i dont want under my hood to look like a circus with all the differenet colors. I wish the greddy pulley set wasn't blue. Doesn anyone know of any other pulley sets? Im trying to stay red, stainless steel, black as much as possible.

[DonDonati88]

what does AFAIK mean??

[I H8 UR DSM]

as far as i know.

[Ace]

I would recommend not getting cams. I had them on my old car and they aren't worth the idle you get for the amount of power you get. Get a bigger turbo or something like that. Because the idle really sucks if you want to stay streetable.

[ItzGenX]

Friend of mine has 256/10.5 intake cam and 264/11 exhaust. It idles rather smooth at 800RPM until the A/C comes on. Other then that, its very streetable. He tells me that the intake cam plays the biggest role on how smooth the engine idles, and the exhaust cam is the way it is for better spool-up.

[I H8 UR DSM]

I would recommend not getting cams. I had them on my old car and they aren't worth the idle you get for the amount of power you get. Get a bigger turbo or something like that. Because the idle really sucks if you want to stay streetable.

Obviously cam selection has a big responsability in this....choose the wrong cams and you wont be happy, choose the right cams for a street setup, and have no disapointments.

JesseRPI

[DonDonati88]

then what are the "right" cams for a daily driver sr20det? I just want more power without rough idles.

[I H8 UR DSM]

2202-RN085 CAM SHAFT STEP 1 256 INTAKE RPS13 - PS13 $220.00 2202-RN086 CAM SHAFT STEP 1 264 INTAKE RPS13 - PS13 $220.00 2202-RN087 CAM SHAFT STEP 1 256 INTAKE S14 - S15 $220.00 2202-RN088 CAM SHAFT STEP 1 256 EXH. RPS13 - PS13 - S14 - S15 $220.00 2202-RN089 CAM SHAFT STEP 1 264 EXH. RPS13 - PS13 - S14 - S15 $220.00 2202-RN090 CAM SHAFT STEP 2 256 INTAKE RPS13 - PS13 $275.00 2202-RN091 CAM SHAFT STEP 2 264 INTAKE RPS13 - PS13 $210.00 2202-RN092 CAM SHAFT STEP 2 272 INTAKE RPS13 - PS13 $210.00 2202-RN093 CAM SHAFT STEP 2 256 INTAKE S14 - S15 $220.00 2202-RN094 CAM SHAFT STEP 2 264 EXH. RPS13 - PS13 - S14 - S15 $310.00 2202-RN095 CAM SHAFT STEP 2 272 EXH. RPS13 - PS13 - S14 - S15 $220.00 2202-RN096 CAM SHAFT STEP 3 264 INTAKE RPS13 - PS13 $185.00 2202-RN097 CAM SHAFT STEP 3 272 INTAKE RPS13 - PS13 $275.00 2202-RN098 CAM SHAFT STEP 3 256 INTAKE S14 - S15 $230.00 2202-RN099 CAM SHAFT STEP 3 264 EXH. RPS13 - PS13 - S14 - S15 $220.00 2202-RN100 CAM SHAFT STEP 3 272 EXH. RPS13 - PS13 - S14 - S15 $220.00 2203-RN009 CAM GEAR INTAKE RPS13 - PS13 - S14 - S15 $175.00 2203-RN010 CAM GEAR EXHAUST RPS13 - PS13 - S14 - S15 $195.00

JesseRPI.

[I H8 UR DSM]

Thats an HKS listing by the way.

JESSERPI

[DonDonati88]

That's not being very specific. LOL

[I H8 UR DSM]

Your wish is our command Don ; )

JESSERPI

[Quick240]

I wish the greddy pulley set wasn't blue. Doesn anyone know of any other pulley sets? Im trying to stay red, stainless steel, black as much as possible.

If the color bugs you that much, you can have them deanodized, and then reanodized another color. Or have them keep it the aluminum color if that's what you prefer.

I found a company on the web a while back that does anodizing, can't remember where it was though. I'm sure a search on Google would turn something up though.

[I H8 UR DSM]

powder coating is a possibility also...i never saw someone care so much about colors of their components : ) matching is for sissy's ; )

lol jk.

jesserpi

[Cyberkreig]

Yeah, cam gears are under the valve cover anyway...

[I H8 UR DSM]

well pulleys arent...and he is talking about pulleys...sooo....

Jesserpi

[SRdS14]

paint them flat black or something...its doesn't matter. I'm gonna end up getting the tomei 270's..break that off in yo azz..if my car sounds lumpy, oh well, i'll get used to it.

[I H8 UR DSM]

learn to drive first

[SRdS14]

:uzi

[I H8 UR DSM]

:chainsaw

[SRdS14]

hey jesse...wanna start a thread with "emoticon war"?? lol...i'm bored man. give me a break..