Got my engine today, now in need of a harness...

Post by **ca18detdrift** » Tue Jul 26, 2005 10:11 pm

I'm very happy! I got my ca18detengine delivered today! Can't wait till i install her in my S13!!! But one thing, it came with a cut harness, so now im in need of a harness.

Anyone have or know where i could get a complete wiring harness?

Website · Post by **flohtingPoint** » Tue Jul 26, 2005 10:14 pm

ca18detdrift wrote:I'm very happy! I got my ca18detengine delivered today! Can't wait till i install her in my S13!!! But one thing, it came with a cut harness, so now im in need of a harness.

Anyone have or know where i could get a complete wiring harness?

http://www.wiringspecialties.com/

Try the sponsors on the side bar =)

Post by **ca18detdrift** » Tue Jul 26, 2005 10:23 pm

Thanks, flohtingpoint... But i only see repair and wiring services being advertised. I'll shoot them an email asking them if they sell complete harnesses. Thanks for the quick reply tho!

Website · Post by **flohtingPoint** » Tue Jul 26, 2005 10:41 pm

ca18detdrift wrote:Thanks, flohtingpoint... But i only see repair and wiring services being advertised. I'll shoot them an email asking them if they sell complete harnesses. Thanks for the quick reply tho!

No biggy =) If I had a spare one I'd shoot you one asap, but unfortunately most of the wiring harness I come across here in Germany are already cut =( If the wiring specialties individuals cannot assist you, you may want to try to contact heavythrottle (www.srswap.com), as they may have one lying around for you, you never know. Worse comes to worse, hit up the nissan for sale section here on NICO and do a "WTB: CA18DET wiring harness" thread and I'm sure someone may have one or could point you to a better location.

Post by **ca18detdrift** » Wed Jul 27, 2005 12:57 pm

Well I've checked both location and they dont have any. If anyone else knows where i can look please tell me, I havent had any luck so far. I'm sure with enought time one will pop up but i would rather get one sooner than later. Thanx!

Post by **c-rad** » Wed Jul 27, 2005 1:05 pm

ca18detdrift wrote:Well I've checked both location and they dont have any. If anyone else knows where i can look please tell me, I havent had any luck so far. I'm sure with enought time one will pop up but i would rather get one sooner than later. Thanx!

Bad timing.... float6969 was just selling one and there was just one on ebay about a week ago. Just need to be patient on these things. I hear themadscientist might be able to help you out though, so you may try shooting him and email. I guess he's gotten some before for people.

Post by **ca18detdrift** » Wed Jul 27, 2005 2:21 pm

c-rad wrote:
Bad timing.... float6969 was just selling one and there was just one on ebay about a week ago. Just need to be patient on these things. I hear themadscientist might be able to help you out though, so you may try shooting him and email. I guess he's gotten some before for people.

Thanks alot C-Rad!! Ill send him an email.

I know I though my motor set came with a harness so i didnt bother buying a harness, i wish I knew then i would have got one!!! oh well.... engine seems to be in good shape (but wont really know until i put it in)

Post by **Pumaking** » Wed Jul 27, 2005 3:34 pm

if your willing to wait I might have one for sale when I get Megasquirt. It probably wont be for another month or two so if your not in a hurry to get the motor in then I'd have mine for sale.

Post by **slownslurious** » Wed Jul 27, 2005 3:37 pm

I emailed you.. if you are in a hurry Jspec.com has one but its pricey.

Post by **ca18detdrift** » Wed Jul 27, 2005 9:03 pm

Pumaking, let me know once you have this for sale.

slownslurious, I emailed you =) Man that IS pricey!

Post by **float_6969** » Thu Jul 28, 2005 1:42 am

explain "cut". Do you not have the part of the harness that goes from the firewall to the ecu, or is the harness just in 2 peices?

Post by **ca18detdrift** » Thu Jul 28, 2005 10:59 am

if it was in 2 peices I would not be having this problem LOL. The harness is cut (the rest is gone) there are no plugs or anything. Thats why i need a complete harness.

Post by **float_6969** » Thu Jul 28, 2005 11:06 am

Ok, I was just checking. I've seen people come in here in the past and said they needed a new harness because it was cut. Well in actuality, it was cut "in two" and they had a complete harness, they just needed to splice it. Anyway, I just wanted to clarify, thanks!

Post by **ca18detdrift** » Thu Jul 28, 2005 12:59 pm

I see ok thanx for checking lol, i can see what you mean though (if one didnt have ANY experience with wiring)...

Post by **Not_a_sr** » Fri Jul 29, 2005 10:04 pm

i have a spare one, it will need some work, someone thought it would be a good idea to use speaker wire to do some extension work on it.

Post by **ca18detdrift** » Sat Jul 30, 2005 12:52 pm

Email sent =)

Post by **c-rad** » Mon Aug 01, 2005 9:13 am

http://cgi.ebay.com/JDM-Nissan...wItem

Post by **ca18detdrift** » Mon Aug 01, 2005 12:59 pm

I know i saw this first thing this morning! Is this expensive? or is the price just right? I know im really not in the position to bargin.. LOL

Post by **biosehnsucht** » Mon Aug 01, 2005 2:17 pm

well it looks in good condition and complete, except no MAF in the pictures despite the description.. it has the ignitor w/ stock bracket and the boost cut solenoid there.. for whats there its not a bad price, but neither is it a good one.

Post by **NeedCAforS13** » Mon Aug 01, 2005 3:35 pm

thats pretty well priced. I sold the same set up for $350 shipped (harness, ecu, dropping resistor, ignitor) about a year ago. If you need one, jump on it, they're becoming rarer every day ($$$) and you won't do much cheaper.

Sean

Post by **Dattebayo** » Mon Aug 01, 2005 10:02 pm

I bought mine from TMS for the exact same price, and that was a friend hook-up.

Believe me, you should purchase that thing right now, because it took me forever to find the one I bought.

Post by **ca18detdrift** » Tue Aug 02, 2005 11:00 pm

Ok, I got this! I think once this and the VPC arrive I'll be all set for the swap. (i have to look and see what else i have left). =)

Post by **sdtouge** » Wed Aug 03, 2005 5:04 pm

not a sr, i sent you a email about the harness mine is janly and i want to start fresh, well frsher.

let me knowmatt

Post by **lifelicksballs** » Sat Aug 06, 2005 12:51 am

i recently got my ca18 motorset from jazzproparts.com and man did they send me sh%$ it came with cut up hoses all around and no wiring harness so if anyone has a spare one that'd be great (btw for future ref. jazzproparts gets their engines from osak(didntknow))

and another thing wiring specialties has a 'cut harness' option wherethey use the ka harness to hook up with the engine without the sr harness...is this possible to diy?

Post by **Neejay** » Tue Aug 09, 2005 10:44 am

lifelicksballs wrote:i recently got my ca18 motorset from jazzproparts.com and man did they send me sh%$ it came with cut up hoses all around and no wiring harness so if anyone has a spare one that'd be great (btw for future ref. jazzproparts gets their engines from osak(didntknow))

and another thing wiring specialties has a 'cut harness' option wherethey use the ka harness to hook up with the engine without the sr harness...is this possible to diy?

wow...did you buy it for the $1500 shipped?

Post by **lifelicksballs** » Wed Aug 10, 2005 12:53 am

$1500 w/shipping

Got my engine today, now in need of a harness...

Got my engine today, now in need of a harness...

Re: Got my engine today, now in need of a harness... (ca18detdrift)

Re: (ca18detdrift)

Re: (ca18detdrift)

Re: (c-rad)

Re: (ca18detdrift)

Re: (Not_a_sr)

Re: (c-rad)

Re: (lifelicksballs)

Re: (Neejay)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums