Got any RB25 pics

Post by **hashiriya13** » Tue Jun 10, 2003 7:47 pm

There seems to be allot of people as of recent with info on the RB25 in 240's. So there must be more people doing the swap. Can you guys post some pics of your setup (completed) so we all can see the similarities or differances.Heres mine just after it was finished. (got more down in the sig)

Post by **mmdb** » Tue Jun 10, 2003 7:47 pm

oh nice manifold... : ) Still savin' up for mine tho. How bout some 1/4 mile times or dynos also. : )

Post by **hashiriya13** » Tue Jun 10, 2003 7:47 pm

Did some 1/8 and found I had a bad BOV. Every shift and would loose power.would have to let off the throttle and ease it in again. Fixed now. but I oly could get a 9.5 @70mph with the problem at 7psi. plan to go back soon. tryin to get it on the dyno before I start upgrading but nothing yet. so the first attempt was bad but should be good next time.

Post by **JonPowell** » Tue Jun 10, 2003 7:47 pm

Here is a pic of it (not completed) I have some pieces getting painted the end of this week and I will post a completed pic next week for you.

Post by **somehelp** » Tue Jun 10, 2003 7:47 pm

did you get the motor off the internet how much and where from :icesangel :ylsuper

Post by **JonPowell** » Tue Jun 10, 2003 7:47 pm

Yes off the internet, $2500 for the ft clip and the guy no longer sells RB clips

Post by **hashiriya13** » Tue Jun 10, 2003 7:47 pm

JonPowell wrote:Here is a pic of it (not completed) I have some pieces getting painted the end of this week and I will post a completed pic next week for you.

Cool. I to am currently involved in some engine clean up/paint projects. I will post completed pics when complete. Should be done by Monday. I have to use the weekends only to take stuff apart, my 240 is my daily driver thats why the clean up is not fully done yet. Anyway nice to see more RB25 projects. I hear of allot but rarely see the outcome. Thats why i started this thread.

Post by **93semax** » Tue Jun 10, 2003 7:47 pm

I don't know if you've seen these before:http://www.geocities.com/vg30etmax/fc064818.jpg3 s14 rb25's in the miami area :o

Post by **hashiriya13** » Tue Jun 10, 2003 7:47 pm

link wont work. Any one else got pics?

Post by **93semax** » Tue Jun 10, 2003 7:47 pm

cut and paste.

Post by **mmdb** » Tue Jun 10, 2003 7:47 pm

got any track times?

Post by **dan240** » Tue Jun 10, 2003 7:47 pm

93semax: those are damn nice cars over there in florida!and yeah, got any times for the 1/4?

thus far i've only heard of night's 1/4 mile time with his RB25DET equipped S13. More times would be really nice!

Post by **JonPowell** » Tue Jun 10, 2003 7:47 pm

Who else has pictures, come on....ANYONE?????

Post by **JonPowell** » Tue Jun 10, 2003 7:47 pm

Here she is all done in the engine bay!!! Just need the fuel pressure regulator to get her running again!

Post by **JonPowell** » Tue Jun 10, 2003 7:47 pm

Her is another shot of the engine bay

Post by **mmdb** » Tue Jun 10, 2003 7:47 pm

ohh nice i want : )

Post by **hashiriya13** » Tue Jun 10, 2003 7:47 pm

looks good. So are you still running it stock? Mine is except the FMIC and IM. Working on aquiring my upgrade parts now. Anyway looks good.

Post by **Vrtgrumpy** » Tue Jun 10, 2003 7:47 pm

OK, here are pics of mine.....

HKS 2535 turbo set up...

Inovative drag turbo set up....

Pic of the whole car..............

Grumpy

Post by **teriyakibroccoli** » Tue Jun 10, 2003 7:47 pm

Grumpy is god.

Post by **hashiriya13** » Tue Jun 10, 2003 7:47 pm

That sucks now mine doesnt look good any more. Nice as always Grumpy.

Grumpy: I got those parts I told you I ordered. I will stop by this week and show you my progress from this weekend. Oh and any word on the SR.

Post by **mmdb** » Tue Jun 10, 2003 7:47 pm

nice grumpy. I like the intake manifold. *thumbs up* Any hp figures or 1/4 mile times?

Post by **kaane** » Tue Jun 10, 2003 7:47 pm

hashiriya13 could you email me at [email protected] , I got a question for you.

Post by **RubHamuSan** » Tue Jun 10, 2003 7:47 pm

and where is everyone getting these greddy intake manifolds from? and how much?

Post by **apex_7** » Tue Jun 10, 2003 7:47 pm

Where do you guys get your Intercooler piping?????????? Do you run the passenger side pipe back behind the intercooler or do you run it behind the radiator?

Post by **hashiriya13** » Tue Jun 10, 2003 7:47 pm

Mckinneys made the custom hot pipe

The kit is a Sr Greddy kit with modified intake side.

Post by **JonPowell** » Tue Jun 10, 2003 7:47 pm

Here's a pic of it almost completely together

Post by **JonPowell** » Tue Jun 10, 2003 7:47 pm

And from the rear

Post by **op.tic** » Tue Jun 10, 2003 7:47 pm

isnt there some sort of clearance issue between the radiator and the block, i mean if you want to get a bigger radiator and put a fan behind it, would it fit? looks like it would be too tight of a fit

Post by **hannibal** » Tue Jun 10, 2003 7:47 pm

Jon,Nice engine bay!!You painted the charge pippes to match the car?? I really like the color!

Post by **JonPowell** » Tue Jun 10, 2003 7:47 pm

Here is the clearance between the FT of the motor and the radiator, if you want to go bigger, there is room.

Got any RB25 pics

Got any RB25 pics

where and how much

ALL DONE!

Another shot

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums