Got all issues solved now car will turn over but won't start

[xxvengxx]

Ok, so I think I have my vacuum leaks taken care of. I had jst completed a complete timing belt change (120k service) and replaced all my fuel injectors, I also replaced the pcv valves and had to replace those two hoses bc they split. Got a new hard pipe hit from Z1 since the inlet for the pcv valve broke off. All that is done and hooked up. Also just had to replace the battery bc it was bad. Now the car turns over but won't start. I think the fuel pump is bad now. I don't hear it hum when I turn the car to the run position. I hear a little click coming from it when I initially turn the key to the run position, but no hum after. I found a ohm test for it that said resistance should be approx .5 ohms. When I did this test I got 48!! I just wanted to get input from some of the experts before dumping another 300 dollars into it for a fuel pump. Thanks.

[Anthony.G.]

Have you tried spinning the CAS and checking to see if the injectors are firing?