got a question

[capwred]

pu tthe motor back in and ready to start it.but when i try to start it the fuse in the battery relocation kit blows.but only when i try to start it.so im wondering what could be causing this.do you thik the stsrt is ground it out?i have checked the wire and cant fine any bad spots.any help would be great.

jason

[UMS_CA18DET]

What is the size of the fuse you have. The reason your blowing a fuse is because something is pulling alot of Amperage causing the fuse to blow.

If I remember correctly the fuse for the starter is 75 amps. Its located in the fuse block next to the stock battery location. Its a fusible link its square I think green or grey.

[knightrider]

did you buy this kit or build it yourself, most battery relocation kits dont include fuses. and i dont think the starter really has a fuse, maybe on the relay side, but the positive battery cable goes straight to the starter, no fuses.

[capwred]

when i got the kit it came with a linked fuse.its a 80 amp fuse.but it worked fine before i pulled the engine to rebuild it.the cable i used is 4ga.i guess i will look over the wiring again but this is killing me. maybe i will try to hook it up with out the fuse and see what happens.