Got 1 race in tonight!!

[fabio420]

So I finally got to take the car out to the track. I wanted to run it without the z32 MAF and the new 370 cc injectors ( I'm still running the stock 260cc), so I could see what 11 psi of boost could do with this setup. Next I'll get new track times with the new injectors and MAF. The *&#py part about it is that I only got one run in. But here is the timesReaction: .573 sec1/8: 9.561 @ 76.22 mph1/4: 14.607 @ 98.07 mph P.S. My buddy's 89 supra only ran a 15.461 quarter mile (HA-HA!!)

[Jookmasta]

what was ur 60ft time? ur speed seems right but u will get faster with more track runs. hey did u run at moroso? also as u now know, moroso sux big time cuz u will always only get one run in. I suggest taking a roadtrip to gainesville. me and my friend got about ten runs in in the time span of about an hour. lol. good reaction time. where were u shifting at?

[fabio420]

Yeah I ran at moroso. my 60 ft time was 2.414. This was all done with a stock AUTOMATIC transmission. I can't wait to put those last 2 things in and really ckarck those 14's.

[fabio420]

I meant crack into the 13 second range (I already ran 14.6 Yeah!).And Gainsville?!! That's so faaaaaaaaaar...

[Florida240sx]

What about Bithalo?Was there 3 hrs and my friend got about 8runs in.Was about a 30-45minute wait.Should of let me drive his car...He can't race..he tries..but he only blows motors.

[fabio420]

Where's "bithalo"?

[Florida240sx]

Off state road 50.

[Florida240sx]

My bad it's Bithlo

[Florida240sx]

That's quite a drive for you.Takes me 2hrs sometimes depending on traffic.Going to try to go in the next couple weeks so I'll let you know how busy it is there.Last year was the last time I went.

[turtl631]

I wanted to run it without the z32 MAF and the new 370 cc injectors ( I'm still running the stock 260cc), so I could see what 11 psi of boost could do with this setup.

Blow up is one thing it could do.11 psi on stock injectors is a horrible idea.Even on a very small turbo like a SR t25, that's too much boost/not enough fuel.

[fabio420]

Yeah, but my turbo is quite small (a t3 with .42 trim and .48 a/r) AND I also have a rrfpr that's 8:1. Besides, the car has been dynoed with a wideband sensor, and it only leaned out at 14.1 psi( I only push it to 11-12 psi).

[fabio420]

It is a

That's quite a drive for you.Takes me 2hrs sometimes depending on traffic.Going to try to go in the next couple weeks so I'll let you know how busy it is there.Last year was the last time I went.

It is a long drive, but it's closer than Gainsville (Ha-Ha)

[Florida240sx]

Yea it is.Hmm 3 weeks I'll have my kit on.Then got to get to dyno so I don't lean out.Then Going to the track.Be Mid July.Although might shoot out there before to get some stock #'s.

[fabio420]

Dude, you should so do it. I ran my car N/A first with some minor bolt-ons(headers, exhaust, pulley, intake) and ran a 17.04. Then now I ran my car, and the satisfaction is immense. I knew what my car ran, and I wanted to know what my setup would yield after all that work ( I bought all parts separately and build my own setup). Very satisfing indeed. Now I gotta shave off 1 more second and I'll start to devote my attention to my other Ka that's getting fully built.

[Florida240sx]

What are you doing Saturday night?Me and a couple of my friends MIGHT go.Will know tomorrow or tonight.Maybe shoot for next weekend?

[fabio420]

I work this saturday, and I have surgery on monday. If I have recovered enough and can convince one of my buddies, I'm gonna try to make it up tjere.

[nissanfanatic]

If you guys go to Gainesville, let me know. I live about 30min from there.