Good&Bad News (for sale)

[redamnavit]

EDIT: bump because motorset deal fell through.

So I'm back from New Zealand and it looks like my wife got the job she was going for down there with Weta Workshop, which means I'll be moving down under sometime in the next year. On the upside I'll be moving somewhere where CAs and RBs are as common as Ford Escorts, but I can't bring what I've been working on. So... here's what I've got. I'll start by saying that no, I haven't gotten it running yet. I need to finish connecting the wiring harness and installing the radiator/intercooler. I'll keep working towards this when/if I have free time but with all the work I have to do to get the house cleared out for sale I'd rather sell it as is and will make an effort to sweeten any deals of that sort.

Car (driven all of 15ft since suspension install):-Red 1993 240sx SE HB, engine bay cleaned out and resprayed a metallic gunmetal-Tein HE suspension, installed-Tein steering rods & Kazama rod ends, installed-Full Kazama control arm set, front bar installed, rear control arm and toe rod still in box-255lph fuel pump, installed-Full Energy Suspension bushing set, steering rack bushings installed, rest in box

Motor:-CA18DET w/ fresh crank and bottom end bearings-CA18 harness modified to mate with the 240, only needs MAF wires extended-Ceramic coated, lightly ported and polished stock exhaust mani-T25 with T3 wheels and ceramic coated exhaust housing-Spec stage 3 clutch-7kg flywheel

Motor-related:-ARC CA airbox, uninstalled-KOYO radiator w/ samco silicon hoses, uninstalled-XS Power intercooler setup, uninstalled, cold pipe not modified yet

Other:-2x Watanabe 16x7 wheels, gunmetal with chrome lip (i'll check offset), with whatever tires were on them when they left Japan-4x old school Volk Mesh wheels, 15x7, stripped for new paint, no tires-1x spare Spearco intercooler-1x HKS mushroom setup for an SR-Extra MAFs, ECUs, CASs, exhaust mani, other related parts-EDIT: GTO 5-bolt front hubs and Z32 5-bolt rears-EDIT: 180sx front calipers, best used as cores for Maxima calipers

All in all I have between 5-6K in the setup. I'd love to get 4K for it but I'm sure that's excessive. Please don't ask for specific pieces. If you want the whole engine setup, or the whole chassis sans engine, I've divide it up in that fashion. If you want the car with just what's installed that's cool too.

Anyway, any reasonable offers will be [email protected]
Modified by redamnavit at 3:05 AM 6/9/2006

[c-rad]

I want the motor mounts.... how much and how soon can I get them?

[redamnavit]

I want the motor mounts.... how much and how soon can I get them?

As soon as you buy the engine they're sitting on. =]

[originalsin]

how much for a sapre ecu and the spare fmic and wat size is it

[c-rad]

As soon as you buy the engine they're sitting on. =]

Gonna be kinda tough to get one person to buy ALL that stuff... When you're ready to sell the mounts by themselves, let me know.

[thekage]

pics to [email protected]

[Rusted_PS13]

how much for the motor setup?

[redamnavit]

how much for the motor setup?

2K and I'll include the spare MAFs, ECU, CAS, filters, water pump, etc. Or make me an offer.

Pics will be up soon, sorry for the delay.

[MagikDragon]

pics and more details to [email protected] thanks man.

[originalsin]

lol how about answering the other questions int he thread too...

[lifelicksballs]

how much for just the engine?

[Sil40sK]

Any way you'd be willing to sell one of those sets of wheels? I'm tired of steelies.

[redamnavit]

how much for the motor setup?

2K and I'll include the spare MAFs, ECU, CAS, filters, water pump, etc. Or make me an offer.

Pics will be up soon, sorry for the delay.

[GooseXRS]

redamnavit,I have an offer for you.Email me at [email protected] Care

[redamnavit]

TTT

[originalsin]

ready to part with the mounts or the turbo yet?

[XTCshri2222]

how much for the koyo and arc box?

[redamnavit]

Quote »how much for the koyo and arc box?[/quote]300 for the radiator, 150 for the box+the attached MAF, shipped. OBO.

Quote »ready to part with the mounts or the turbo yet?[/quote]Now that I pulled the engine, sure. 140 for the CA engine mounts, 160 for all 3, shipped. OBO.

[originalsin]

youve got mail. mounts are mine

[Boostin_S13]

How much are you asking for, GTO 5-bolt front hubs, Spearco intercooler Dimensions? Kazama rear control arms?

[redamnavit]

original sin: sorry I haven't responded yet, busy week. I'll email you tonight.

Boostin_S13: GTO hubs: 350 shipped OBOKazama rear arms: 325 shipped OBO

I'll measure the intercooler tonight and get back to you with that.

[originalsin]

sounds good, how much for that turbo

[r32line]

Welcome to New Zealand

[redamnavit]

The Spearco has a 23x6" core, 32" from end to end. I'd like 150 shipped OBO, and that's with a pair of 90 degree elbows and clamps.

[originalsin]

i sent you an email, get back to me with your paypal man, i want them mounts

[redamnavit]

bump

[originalsin]

good seller so far, will confirm once i get my 3rd mount, but the 1st box got here real quick TUP

[mrzabala]

How much for the car? e-mail me pictures at [email protected]

[dvd]

The Spearco has a 23x6" core, 32" from end to end. I'd like 150 shipped OBO, and that's with a pair of 90 degree elbows and clamps.

i just emailed ya, hopefully you still have it and can ship it out asap since i broke mine =[

[kapower06]

Would you be interested in selling the turbo? Also is it a CA t25 with the t3 wheels, or a t25g from an SR? Basically will It bolt strait on? email at [email protected]. Have cash in hand ( well pay-pal lol)

Also got any pics?