Ghetto tubo kit... cheap?

[club240sucks]

i was told that if your willing to get ghetto you could build a turbo kit for about 700-800 bucks, using a T25 with an internal wastegate with a srt4 intercooler and some piping and all the other goodies

anyone else heard of this or seen it, i was told u get about 180-210 hp at the wheels on a stock KADE after this ghetto kit

let me know what ya think

[Biggamehit]

I despise the word "ghetto kit"

its not ghetto if your using your own brain power to turbo a car

a t25 is small, but its nothing "ghetto" about a Garrett turbo unless you get the compressor wheel dipped in chrome in attemps to make it spin faster ( joke )

also using other people upgrades can help. turbo cars at the lowest level are not rocket science and if you just want fun boost it can be built for that much.

my initial setup was 800 and since then i have put more money into it.

[club240sucks]

what was ur initial setup?

[Chezedik]

I am selling my stuff, check it out.

zerothread?id=235626

[Edub1]

If you stay around 5lbs with no IC and just a FPR you might get away with it.

[Riubens]

ive spent about $1300 on my set up but thats including fmic (with pipes) wideband,gauges, just look at my sig, believe me YOU NEED A WIDEBAND!

forgot to add, its very fun fast and reliable

[Biggamehit]

what was ur initial setup?

.

Initialxspower T3 ( with z31 backup)ssac topmount manifold ( spot welded the suspect spots))xs power bov370cc injectorssafc1greddy Full auto timerSr20 smic pipingrb20smicearls oil line fittingsNGK copper plugs (gapped to .033)N60 MAF255 pump--------------------------------------CurrentHolset H1C turboBlitz bov370cc injectors(sti 550cc's coming)safc1greddy Full auto timerssac fmicearls oil line fittingsNGK copper plugs (gapped to .033)N60 MAF255 pump---------------------------------

comingNGK wideband comingRev Hard Log Manifold
Modified by Biggamehit at 7:25 PM 3/19/2007

[Florida240sx]

Spent 1350 on my friends$400 for used turbo kit, kkk27 turbo off a porsche small fmic, some piping, manifold that ha da crack... Gave my friend my tial wastegate, bought a New SAFC $260 Fuel pump $85, Bov $50, Oil line kit $100, Downpipe $100... It can be done under $1500 but don't do this to your daily driver otherwise you'll be in trouble and spend more money. Do it right the first time

[WDRacing]

You need to fix your signature, its far to big. Look at mine, thats as large as you can go.

Search EBAY and you can have boost for $1000

WD

[Biggamehit]

LOL...

my setup was to my daily driver. i have had no down time. Timing is the biggest mistake I see alot of KA-T guys make. i bought a pretty good timing gun. before i installed my kit, i set the base timing and after the turbo was on and idling properly, i set my timing to about 15-16*. no pinging no knocking no misfiring.

boost is addictive but stay with-in your limits and you will be fine.

[Brandon93240]

hey I've got a revhard manifold. never used ceramic painted and the runners are divided. I'll let it go for 175 plus shipping. Sorry didn't mean to thread jack the op.

[Biggamehit]

e-mail me bro asap

[email protected]

threadJack terminated