Getting XXR 530 18x8.75 +33 offset, what tire size would I need?

[SSiso]

I will be getting these wheels soon. XXR 530 18x8.75 +33 offset . I was wondering what tire size would I need. I was thinking 225/40/18 but wasn't sure. When it comes to wheels I'm clueless. Also I plan on dropping the car on H&R Springs or Eibach Springs depending on how the car will look. I'm going for that fitment/flushed look if you know what I mean. Thanks and god bless

[SSiso]

Also will I rubb if I go with this setup? I totally find with taking out my wheel cover. Also I did a little searching and found a FRS with he same wheel set up but instead he was rocking a 235/40. So my question is which one can I rock w/o rubbing? 235/40 or 225/40 I'm currently on stock height.

[BamaCoupe]

You need 235/45 R18 for tires. I have 18x8 with 30mm offset in the front, 18x8.5 with 33mm offset in the rear with an eibach drop and I do not rub. Your setup would be close to mine which is why I told you all that; I think you'll be protruding a little more than I by a few mm's which won't be noticeable and my setup is pretty flush if this helps any.

[SSiso]

I have already, put in the order for the tires, I'm not sure if it's too late to cancel the order but will I have any rubbing issues with the 225/40/18 ? And if I dont I will have to get coils instead of spring correct, In order to sit flush, if not close to flush?

[SSiso]

Also I will be rocking the 18x8.75 offset +33 ALL AROUND, that's why I would to know if I would have rubbing issues.

[SSiso]

Do you have any pictures that you could post so I can get an idea? If so I greatly appreciate it